Sleek iPhone 6 Plus Dock
Sleek iPhone 6 Plus Dock
Published 2015-04-23T00:20:37+00:00
Here is a sleek iPhone 6 Plus Docking Station. The docking station is designed to be minimal, functional and as slim as the iPhone 6 Plus itself.
The docking station has the following features:
1) Portrait Mode
2) Landscape Mode
3) Built in Sound Amplifier
4) Built in Lightning Cable slot
If you print one, do share it with the community
I'm sure you will love the dock!
Print at 0.2 mm layer height, with 10% infill. This uses 39 g of filament and takes 8 hours and 32 minutes. I've printed the dock with the following settings with my PrintrBot Simple Metal Plus: 1) Cura 2) Layer Height - 0.20 3) Shell Thickness - 1.0 4) Fill Density - 20% 5) Print Speed - 40 mm/s 6) Print temp - 208 © 7) Print Material - PLA 8) Support Type - Touching Buildplate 9) Platform Adhesion - Brim I don't have a heated bed and hence I used the Print Adhesion Setting.
Date published | 23/04/2015 |
Time to do | 512 - 522 minutes |
Material Quantity | 39 g |
Dimensions | 78 mm x 73 mm x 70 mm |
Complexity | Easy |
Support Free | YES |