Phone Holder (Adjustable)

If you are interested you can visit my channel :)
https://www.youtube.com/channel/UCmdKwVfSZhVasOl5PRLI1EQ

Consider a small donation if you like the model and it fits your needs :)

Update: PLA doesn't stand the sun very well in terms of temperature, ABS or PETG is a much better choice!

Tip: You can mirror the design for left-handed use!

Height to the top of the strap: 5.7 INCH
Width where the phone fits: 3.35 INCH

The model has slightly improved the holder can tilt and therefore can be mounted on the slanted parts of the bike. The holder is universal and can hold many sizes of phones due to the rubber strap that goes over the phone, it can even hold phones in their cases.

This strap has to be printed with NinjaFlex so be aware that you can do this.

HARDWARE:
2x M5x50 screws countersunk
2x nut or nylock nut M5

IMPORTANT NOTE:
The model is parametric adjustable so if you need a different size I can upload more STL's with different sizes, just let me know in the comments

Material: PLA or PETG (feel free to use ABS)
100% infill for the phone body (or if you know what you do choose your own settings)
25% infill for the brackets
4 Wall lines
210C Nozzle
Cooling fan 50-80%
Bed 50C
Use 3D lacker
Use a brim of min 2 lines!
Supports are mandatory! (for the bottom of the phone holder)