Skip to content

Tintin submarine

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.3/5 (9 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 25k views
  • 57 likes
  • 132 downloads
  • 3 comments
License
3D design format
ZIP Folder details Close
  • Sous Marin TinTin.zip
    • Version 1m/Black_accessory.stl
    • Version 1m/Black_Body_1-5.STL
    • Version 1m/Black_Body_2-5.STL
    • Version 1m/Black_Body_3-5.STL
    • Version 1m/Black_Body_4-5.STL
    • Version 1m/Black_Body_5-5.STL
    • Version 1m/Black_fin_1-4.STL
    • Version 1m/Black_fin_2-4.STL
    • Version 1m/Black_fin_3-4.STL
    • Version 1m/Black_fin_4-4.STL
    • Version 1m/Canopy variante 1/Grey_canopy_1-2.STL
    • Version 1m/Canopy variante 1/Grey_canopy_2-2.STL
    • Version 1m/Canopy variante 2/canopy1-3.STL
    • Version 1m/Canopy variante 2/canopy2-3.STL
    • Version 1m/Canopy variante 2/canopy3-3.STL
    • Version 1m/Canopy variante 2/cockpit-fusionn.pdf
    • Version 1m/Canopy variante 2/moule canopy 1 partie.STL
    • Version 1m/Canopy variante 2/moule canopyen 3 partie 1-3.stl
    • Version 1m/Canopy variante 2/moule canopyen 3 partie 2-3.stl
    • Version 1m/Canopy variante 2/moule canopyen 3 partie 3-3.stl
    • Version 1m/Canopy variante 2/moule canopyen 3 partie.STL
    • Version 1m/Canopy variante 3/canopy 1-2.STL
    • Version 1m/Canopy variante 3/canopy 2-2.STL
    • Version 1m/conector.STL
    • Version 1m/Grey_cockpit_1-2.STL
    • Version 1m/Grey_cockpit_2-2.STL
    • Version 1m/grey_dashboard new.STL
    • Version 1m/grey_handlebar.STL
    • Version 1m/Grey_propeller.stl
    • Version 1m/Stand_1-4.STL
    • Version 1m/Stand_2-4.STL
    • Version 1m/Stand_3-4.STL
    • Version 1m/Stand_4-4.STL
    • Version 1m/White_accessory.stl
    • Version 1m/White_Body_1-5.STL
    • Version 1m/White_Body_2-5.STL
    • Version 1m/White_Body_3-5.STL
    • Version 1m/White_Body_4-5.STL
    • Version 1m/White_Body_5-5.STL
    • version 50cm/aileron arriere couleur noir.STL
    • version 50cm/arriere requin couleur blanc.STL
    • version 50cm/arriere requin couleur noir.STL
    • version 50cm/canopy variante 1/canopy variante 1.STL
    • version 50cm/Canopy variante 3/canopy variante 3.stl
    • version 50cm/conector.stl
    • version 50cm/fumigene couleur noir.STL
    • version 50cm/grande nageoir dorcal couleur noir.STL
    • version 50cm/guidon couleur gris.STL
    • version 50cm/helice couleur gris.STL
    • version 50cm/interieur cockpit couleur gris.STL
    • version 50cm/milieu requin couleur blanc.STL
    • version 50cm/milieu requin couleur noir.STL
    • version 50cm/nageoir avant couleur noir.STL
    • version 50cm/nageoir dorcal couleur noir.STL
    • version 50cm/nez requin couleur blanc.STL
    • version 50cm/nez requin couleur noir.STL
    • version 50cm/oeil couleur blanc.STL
    • version 50cm/partie central modifier/partie blanche/conector.stl
    • version 50cm/partie central modifier/partie blanche/milieux blanc 1-2.STL
    • version 50cm/partie central modifier/partie blanche/milieux blanc 2-2.STL
    • version 50cm/partie central modifier/partie noir/milieux requin 1-2.STL
    • version 50cm/partie central modifier/partie noir/milieux requin 2-2.STL
    • version 50cm/Stand_1-2.stl
    • version 50cm/Stand_2-2.stl
    • version 50cm/tableau de bord couleur gris.STL
    • version 50cm/Canopy variante 2/canopy1-3.STL
    • version 50cm/Canopy variante 2/canopy2-3.STL
    • version 50cm/Canopy variante 2/moule canopy.STL

Learn more about the formats
Last update 2023-10-29 at 09:27
Publication date 2020-07-23 at 19:35
Design number 176514
DamDam3D

DamDam3D

3D printer file info

3D model description

Hello everyone,

Here's my version of Tintin's submarine.

The model is available in two different sizes, 50cm and 1m.

As I've been a big Tintin fan from an early age, I wanted to make a large submarine with as much detail as possible.

In order to be accessible to the majority of commercial machines such as the Prusa Mk3, Ultimaker 2 or Ender-3, for example, the submarine is divided into several modules no larger than 200x200x200mm.

For playfulness and to avoid painting, I chose to cut the submarine according to color.

The top (black) and bottom (white) modules have mounting nipples forming sections.

The individual sections are joined together using round connectors.

Some small parts (when too small) have a hole to allow 1.75mm filament to be used as a connector.

For the 50cm model, the dashboard switches were too small, so I drilled holes to replace them with a piece of 3D filament.

The complete assembly requires the use of glue.

Every detail has been designed to be easily printed with a Ø0.4mm nozzle, I've done everything to reduce excessive overhangs.

The .stl files are already oriented to obtain the best possible printing result.

►Edit of 07/08/20, Modification of certain parts to improve their quality during printing, addition of 3 different canopies, one hollowed-out structure, one solid, one cut-out structure + pdf for cutting the panes out of 0.2mm transparent plastic (file cover sheet type).

►Edit of 12/09/20, correction of two errors in the last two fuselage files, which prevented the installation of the horizontal and bottom fins of the shark

►Edit of 10/01/21, Final version, improved instrument panel and steering wheel/guidon to match the 1991 cartoon, minor modification to the dorsal fin, modification to one of the canopy variants which was too thin.

►Edit From 11/01/21, Finished project, 100% printable model, I added the molds to make the thermoforming canopies, as well as the model size 50Cm.

Warning:

This is a fan-representation from the 1991 animated series "Les Aventure de Tintin" .

Don't forget to post your creations too, and don't hesitate to contact me if you need any help.

3D printing settings

  • Designed for a 0.4" nozzle

  • Designed for standard settings.

  • Printing in 0.2mm layer height, with a variation of this height when rounding (possible to increase or decrease layer height at your convenience).

  • fill 10% contour number 3.

  • Be careful, however, to increase the number of contours and the filling for the fins (particularly the 4 at the rear and the two at the front, which are very large and therefore fragile).

Categories

All designs › Game

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.