Adidas Mouthpiece

Adidas Bong Mouthpiece. Includes rubber band on file.

Adidas spout for hookah. Adaptive rubber included on files.

SPANISH

With 0.12 layer height is sufficient, 2 perimeters, 4 solid layers below and 6 above and "fast honeycomb" filling at 15%. Automatic supports on the outside and none on the inside (no problem when making the hollow cylinder). I usually enter the stop command in a certain layer to change the color:

Command: (the pictures show where to put it in simplify3d // n=stop layer)

{REPLACE "; layer n, Z = " "G91" E-5 Z20 X60 F5000 F5000 M0; layer n, Z = "}

For the rubber insert, the configuration depends on the type of flexible filament you use. I use the Geeetech brand. Speed 20mm/s, 1 perimeter, 4 solid layers above and 4 below and 15% filler.

ENGLISH

With 0.12 layer height is enough, 2 perimeters, 4 solid layers below and 6 above and 15% "fast honeycomb" filling. Automatic supports on the outside and none on the inside (no problem when making the hollow cylinder). I usually enter the stop command on a certain layer to change color:

Command: (in the photos it is indicated where to place it on simplify3d// n = stop layer)

{REPLACE "; layer n, Z = " "G91" E-5 Z20 X60 F5000 F5000 M0; layer n, Z = "}

For adaptive rubber, the settings depend on the type of flexible filament you are using. I use the Geeetech brand. Speed 20mm/s, 1 perimeter, 4 solid layers above and another 4 below and 15% infill.