AIRSOFT AK 12 Conversion Kit - GEN.1

Please READ all the description

EVEN WHEN ON IMAGES YOU CAN SEE AK12K THIS KIT CONTAIN FILES FOR FULL LENGTH AK12, CHECK ALL IMAGES

DISCORD: https://discord.gg/NKtyGVyWzU
PAGE: https://www.facebook.com/3DprintedAirsoft
ASSEMBLY VIDEO: https://youtu.be/2or_MVLOdnI

AK 12 conversion Kit. This kit will make your AK 74 to looks like AK 12

Changelog: 29.7.2020 GEN 1 - published
4.9.2020 rear sight block and safety updated to
more match AK12 locking system

! Before we start, you have to make sure your gun is compatible, this version is make for airsoft guns with steel recievers and rivets ( you can found picture in "photos" ) ! if you are going to use "K" version and its flashhider, before you cut the barrel, measure it all precisely

Grip:https://cults3d.com/en/3d-model/various/ak-12-grip-new
Stock:https://cults3d.com/en/3d-model/various/ak-12-stock

What does this kit contain:

• Lower handguard
• Lower handguard - experimental
• Upper handguard
• Lower and upper handguard merged to one
• Handguard pin
• Gas tube ( 2 versions )
• Rear sight block replacement
• Ris rail for dust cover
• Ris rail assembly for upper handguar
• Front sight ( 2 versions )
• Front sight cap
• Muzzle "end" ( 2 versions )
• Quick attachable muzzle device
• AK12 "K" muzzle device
• Rear sight frame
• Dust cover lock ( 2 versions )
• Dust cover lock button

For what ak lower:

All its need to have barrel assembly like lower on this picture:
https://airsoftpro.cz/en/gun-parts-upgrade/aeg-outer-spare-parts/ak-parts/gun-body-for-ak/ocelove-telo-pro-ak-74-se-sklopnou-pazbou-detail
This kit will NOT BE COMPATIBLE with lowers like: ( most of plastic guns ) https://airsoftpro.cz/en/gun-parts-upgrade/aeg-outer-spare-parts/ak-parts/gun-body-for-ak/plastove-telo-pro-ak47-detail

What will you need:

• Basic tools for 3d prints finishing
• Drill
• 4x low profile M5 nuts
• 5x M5x10 screws
• Stick with 5 mm in diametr, it will be cuted to 15 mm, 24 mm and 34 mm length and to be muzzle locking pin
• Stick with 3 mm in diametr, it will be cutted to 12 mm lenght
• Some springs
• Front sight from Sight block
• 1x M3 headless screw for "K" flash hider
• 2x M3x10 headless screw for dst cover locking mechanism
• 1x M3x10 headless screw for sight frame

How to attach handguard:

• You will need to drill hole to lower reciever, this is drastic change, so be carefull, there is template in "Photos", print in as A4 and check dimension acording "size check" on the template

I DONT WANT TO CUT BUT STILL USE THIS KIT - sure you there is "lower_handguard_experimental, it use 2x M3 crew and nut to secure it to barrel, its called experimental, because i did not printed it.

What parts to print:

• Depending on your barrel, choose "screw holes" or " pin holes" parts, this kit was mainly for barrels that use screws to attach gasblock etc, but also there is version for barrels that use pins like real thing does, i have not tested pin holes parts but they were done according to measures from cyma AK 74.

I DO NOT CARRY ANY RESPONSIBILITY ABOUT DAMAGES ON YOUR PROPERTY YOU MIGHT DO

Mag on render: https://cults3d.com/en/3d-model/game/ak-120-rounds-airsoft-magazine-midcap-120

ALL FILES ARE ORIGINAL WORK AND ARE MADE BY ME, IF YOU NEED ANY SORT OF PROVE LET ME KNOW.

FOR AIRSOFT USE ONLY

Alway use atleast 4 walls with 0,4 noozle and about 20% infill, i recommend you to use materials like ABS, PETG but PLA+ can do