Hama Beads 5mm Complete Kit :D

Tired of having to wait for shipping times, lack of colors in your designs, lack of customization and paying 50% more. We have the solution, Introducing the 5mm Hama Beads Kit.

UNLEASH YOUR IMAGINATION WITH THIS PRODUCT!!!!

The kit includes The Famous Beads, along with the Base and the Gripping Clamp.

Also, if you are not satisfied with the size, you can scale the files to have 2.6mm Beads, or even a size you create yourself.

What are you waiting for!!!!

How to use in 3 simple steps:

1: Print all parts

2: Place the Beads on the base according to the design to be made.

3: Place a piece of butter paper (the kind used in the kitchen to prevent the cakes from sticking to the molds), and iron the entire surface.

AND READY!!!!

Note: The time you leave the iron on the material will vary the final result, you can have a smooth design if you leave it for a long time, or you can leave it little to show the holes, YOU DECIDE :D

CAUTION: NOT RECOMMENDED FOR CHILDREN UNDER 4 YEARS OF AGE.

The photos are illustrative of what can be achieved.

Important: Recomended a non toxic Plastic like Petg (Try to not use Abs)

You can decide the parameters, also I put a fhoto with some of my parameters if you want to see them

Recomended velocity: 35mm/sec

IMPORTANT: If your printer isnt calibrate, or to avoid risks, I recomend to use the 100 Beads file with Rafts like the Fhoto (Because if one bead escape from the bead, can create a mess :D )

Nozzle: 0,4mm

I put supports, They arent necesary (Except for "Hama Beads Base")

"Hama Beads Base" needs to be cutted a little if your Printed isnt calibrated well or if it is excesive calibrated.