DIY Ginetta G58 Steering Wheel

I love this wheel. I saw it in the Ginetta in AMS2 and i wanted to make one for myself.

The wheel has a 50,8mm bolts pattern, where normally most wheels have 70mm bolts pattern. UPDATE: Added a 70mm bolts pattern version only!
So to get it bolted on most wheel i made an adapter for it.
Also there was no room to for the shifters. That means these shifters that comes with it are special. They got a small housing, but are really strong! And i love the feeling of it.

This wheel are the stickers included as well :)

Bill of Material is also in the files! And a document that explains how to make everything.

What you all need:
- BU0836A-NC 12-Bit Joystick Controller
- BU0836A Break out Matrix board
- 2x rotary encoder. (https://www.digikey.nl/product-detail/nl/288V232R161B2/CT2999-ND/270036, https://www.digikey.nl/product-detail/nl/288T232R161A2/CT3002-ND/203827/)(you can also order them at leo bodnar)
- 8x 12mm push button(aliexpress or PV5S24011(those are awesome)
- 2x micro switch lever (https://nl.aliexpress.com/item/32802664696.html)(near future: https://www.digikey.nl/product-detail/nl/D2HW-BL213ML/SW734-ND/404517/)
1x GX12-4 pin connecter
(To make the build more easy: Use Leo Bodnar's Micro BBI instead of BU0836A-NC)

Shifter:
2x M4 x 25
4x M3 x 10
4x M3 Lock Nut
4x M4 x 25(countersunk)(front, shifterspacer, shifter)
4x M2 x 10/12
4x M2 Lock Nut
4x or 8x 12 x 5 N52 Magnet
6x M4 Lock nut

Front:
8x M3 x 12
3x M5 x 12 (countersunk)(spacer)

Back:
8x M3 x 12
3x M5 x 30(countersunk)(spacer)
3x M5 x 25 (add back and spacer on QR)
3x M5 Lock Nut
3x M5 x 25 (hex or round spacer)
4x M3 x 25 (hex or round spacer)
4x M2 x 5 (for bodnar board)

Grips:
6x M5 x 20
6x M5 Lock Nut

Encoder:
2 M2 x 6 adjustment screw

My advise is to cut the frontplate in 4mm aluminium/stainless steel/carbon and the backplate in 3mm. If you want you can also cut the paddle shifter in 3 or 4mm aluminium/carbon

Hope you like it :)

And feel free to contact me if you have a question about it.

Changelog 1:
Added new shifter spacer
Added new backcover
Added 70mm bolts version!

Changelog 2:
Added only 50mm bolts pattern version
Added new sticker sheet.
Added shifterbase so you can use D2HW - BR213MR switch
Added new grips!

Changelog 3:
You will find all the latest parts in the V6.rar file.

Changelog 4:
Added option to make the exact wheel you see in 'makes'. So a version with hatswitch/joystick from bodnar.

For personal use only - non commercial - not for resale.
You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model.

If you have any question, if you want to talk about the project, if you want to speak to other builders or if you are interested in new projects, join my Discord: https://discord.gg/mN3FwkN9WB

Grips at 40% infill. 0.2 layer.
Backcover could be at 40% aswell.