Hydroponic base for 3 glass test tube (Base or hydroponic base for 3 glass test tubes)

FRANÇAIS

Hi there,

This is a really simple and cute base (holder), to support 3 glass test tubes (15x150mm).

Light design, discreet, to highlight the lenses prouts growing (for example).

It is fun, simple, why not "romantic" and appreciated by children.

Can also be used on your desk at your office.

Just push a little piece of cotton at the bottom of the tube, add 2ml of water, and drop 5 or 6 lenses. After 2 or 3 days, they will begin to grow. Add 1ml of water each 2 or 3 days, thats it.

You can find here the 15x150mm Test tubes (pack of 10) at good price.

If needed, ask me for different tube size, or adapt the sketch N°2 of the fusion .f3d file provided.

As 16mm diam tubes are frequent in my country, you'll find also a .stl file for 16mm tubes.

Have fun!

ENGLISH:

Hey, guys,

Here is a very simple base (stand), to hold 3 glass test tubes (15x150mm).

Light, discreet design, to highlight lens shoots for example.

It's fun, simple and appreciated by children.

Can also be placed on your desk, in an installation room, at work.

Simply push a small piece of cotton wool to the bottom of the tube, add 2 ml of water and place 5 or 6 lentils. After 2 or 3 days, they will start to grow!!! Add 1 ml of water every 2 or 3 days, that's all.

Vous pouvez trouver ici les 15x150mm Tubes à essai (pack de 10) à bon prix.

If necessary, ask me for a different tube size or adapt schematic No. 2 of the .f3d merge file provided.

As 16 mm diameter tubes are common in my country, you will also find an .stl file for 16 mm tubes.

Have fun!