Skip to content

Anet A8 A6 X Axis Belt Tensioner (No Z Axis Pressure)

a125932a50abb0af8ac44745c8c7869e.png Anet A8 A6 X Axis Belt Tensioner (No Z Axis Pressure)
x_axis_belt_tensioner_v4.stl Anet A8 A6 X Axis Belt Tensioner (No Z Axis Pressure)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.5k views
  • 8 downloads
License
3D design format
STL Folder details Close
  • x_axis_belt_tensioner_v4.stl

Learn more about the formats
3D model size X 8 Γ— Y 18 Γ— Z 76 mm
Publication date 2020-08-13 at 09:12
Design number 184815
Andrux51

Andrux51

3D printer file info

3D model description

I can't even express how unhappy I've been with the different solutions I've used from Thingiverse for X axis belt tension on my A8. It has endlessly been a thorn in my side since day one with this printer.

Now that I'm done ranting, I present an entirely new design that takes the belt tension's pressure away from the Z axis's right carriage entirely, and doesn't depend on forcing itself against anything to provide continuous tension.

Bill of materials:
* 2x this print
* 1x 3mm bore GT2 pulley (16T or 20T) (https://amzn.to/2Sr45OD)
* 1x M3x20 screw (https://amzn.to/2XMIDtn)
* 2x M3x12 screw (see M3x20 link)
* 3x M3 Nylock or hex nut (https://amzn.to/2XLiCdM)

This was designed to hold a toothed pulley, but I'm sure you could also use the hilarious flanged bearings that the printer shipped with.

Print two and clamp them onto the X axis rails near the right Z axis mount. Using your fingers, push against the vertical frame piece (NOT the z carriage) to apply tension to the belt, then tighten into place.

Before you ask, yes, you will sacrifice a small amount of travel on the X axis (this piece is 18mm wide), but it you put it in a good spot, the nozzle should still be able to reach the entire bed. Your mileage may vary, especially depending on mods you've put on the printer.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.