rc 1/8 pontiac gto 1965

This is a 1/8 scale rc pontiac gto 1965 with custom chassis
you will need a large printer the same size as a cr-10 to print this you can check out my facebook group (https://www.facebook.com/groups/245120600037552)

    Parts list for pontiac gto 1965

.65mm shocks for the front
.80mm shock for th rear
.16mm m3 bolt x39
.50mm m3 bolt x2
.8mm m3 bolt for motor mounting x2
.26mm m3 bolt x14
.26mm m5 bolt x2 for the front axle
.m5 nylon locknuts x4
.20mm bolt for bolting the body to the chassis that- 
you will need to drill your self x6-8
.550 size i am running a 21.5t brushless motor you don't have to it is way to fast
.juststock hoddywing esc the same you don't have to it is way to fast
.trackstar low profle servo
.10x15x4 bearings x4
.5x10x5 bearings x8
.18mm m3 threaded rode x2 for front steering links
.46mm m3 threaded rode x3 for servo and rear top link
.Tamiya Hornet, Grasshopper, Unimog, Lunch Box Rear Axle Shafts (3555054)- 
x2 for rear axle
.you will need the balljoint and hinges for the this monaro (not my model)  
https://www.thingiverse.com/thing:2931131

And this for the hood hinges (https://www.thingiverse.com/thing:2765065)

all the problem you see in the picture have been fixed in the file so will not need to cut anything like you see in the picture and my print quality does not do the model justice

anycubic chiron
0.2 layer height
support material