Skip to content

Driver - Pilote for Slot Car

drivers into corvette53.jpg Driver - Pilote for Slot Car
girl driver rendu.jpg Driver - Pilote for Slot Car
DRIVER lunette et barbe.jpg Driver - Pilote for Slot Car
Drivers 2 MM.jpg Driver - Pilote for Slot Car
DRIVER sans lunette.jpg Driver - Pilote for Slot Car
Drivers MM.jpg Driver - Pilote for Slot Car
Pilote Assis MM no lunette.stl Driver - Pilote for Slot Car
PILOTE MM Lunette barbe.stl Driver - Pilote for Slot Car
PILOTE MM Lunette.stl Driver - Pilote for Slot Car
Girl Short HAIR Low Res.stl Driver - Pilote for Slot Car
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 8.7k views
  • 19 likes
  • 35 downloads
  • 1 collection
License
3D design format
STL Folder details Close
  • Girl Short HAIR Low Res.stl
  • PILOTE MM Lunette barbe.stl
  • PILOTE MM Lunette.stl
  • Pilote Assis MM no lunette.stl

Learn more about the formats
Publication date 2020-09-25 at 11:02
Design number 204069
SlotED

SlotED

3D printer file info

3D model description

4 models of drivers to sit in our beloved SLOT cars.

I was inspired by the helmets that equipped the racers of the 1950s and the Mille Miglia, those without glasses for the interior driving.

Due to lack of space, it is also possible to cut the bust at the arms for the cockpit with the engine under the pilot.

There's

  • A pilot with half-long hair.

  • A bearded man with MM glasses and helmet

  • One with MM glasses and helmets

  • One without MM goggles and helmet

3D printing settings

I print with an ORANGE30, so it's a RESIN printer, with an exposure time of 10 seconds and the first 6 layers at 100 seconds (to be adapted according to the resin used and the type of printer).

Normally the default supports proposed by CHITUBOX are good, the arms do not need supports, I tilt the objects slightly by 15Β°.

The drivers are hollow, that's why there is a hole in the lower back to evacuate the resin.

WARNING FOR A FILAMENT PRINTER, I will put the pilot on the BACK to have a contact with the print bed, and this for RC scales, like 1/18 1/6 etc...pilot height more than 45 mm...

It is imperative to set the scale according to the cars, in general I set the driver's height to 26 mm for 1/32 cars.

For the 1/24 a height of 30 mm should be suitable.

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.