Art deco candle and tealight holder

Four (4) separate 3D-printed pieces is assembled to this fully functional and stable piece of art deco jugend candle and tealight holder.

When 3D-printing: Position the pieces in your printer as in the pictures. NO support. You can choose between a tealight holder or a candle holder – both versions are included. The candle hodler is carefully designed to perfectly fit IKEA 100% stearic (stearin) candles. Use a brim to avoid warping. The brim needs to be carefully removed afterwards and the edges need to be trimmed for a smooth surface, preferably with a sharp knife. Layerheight: 0,1 -0,2 mm.

When assembling: Use superglue as described in picture 12.

When assembled: If preferably, spray paint it. Glossy or matt (as in my pictures).

When assembled and/if surface treated: Enjoy standard size tealights (40 millimeters diameter). When using candles – be sure to blow out the flame before it reach the 3D-printed plastic – fire hazard.

When 3D-printing: Position the pieces in your printer as in the pictures. NO support. You can choose between a tealight holder or a candle holder – both versions are included. The candle hodler is carefully designed to perfectly fit IKEA 100% stearic (stearin) candles. Use a brim to avoid warping. The brim needs to be carefully removed afterwards and the edges need to be trimmed for a smooth surface, preferably with a sharp knife. Layerheight: 0,1 -0,2 mm.