GOT Dragons Heart Revenge part2– by SPARX

Update ; 21/07/2020
added the wings to this model download
I do not understand the number of downloads of a part that is only for a specific model so removed separate files.

Update ; 15/09/2019
no wings at the momemt, as I need to re-sculpt as they cover too much of Daenery's body. I will upload free sets of wings later, for now feel free to download . .

Daenery’s dead! Drogon fly’s into distance with the limp body . . the END?
Well in my imagination not so, sharing part of his heart Daenery’s is reborn and in doing so Drogon is reduced in bulk and takes on almost human form . . there is only one thing on both of their minds . . . Revenge!!
George R.R. Martin’s A Song of Ice and Fire novels have Drogon as black, Rhaegal’s is made up of green and bronze tones and Viserion is mostly a cream colour with white teeth . . . . I decided to experiment with colour changing lacquers and incorporated Drogon’s head with Viserion’s mouth and used Rhaegal’s skin colour . .so all three Dragons are reborn into one . .As for Danny, I gave her a blue/purple reptile skin armour and skirt . . but paint as you see fit.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

THIS MODEL DOWNLOAD IS ONLY THE DRAGON. NOT THE Female DAENERY AS WELL. . .
You can download Daenery from this same site for the full diorama. . so many files and you have the choice with the files split in this way.
TIPS:
1. If you intend to create the full diorama do not glue female to base till dragon is positioned on both bases. .
2. Fit a head to upper torso with magnets before gluing the arms onto torso to get a cleaner better fit.

No Instructions with this one as All of the parts are orientated to print base ready to print with your favourite slicer . .

The individual files are FDM orientated for least support and strongest print orientation, as seen in the images.
Resin print; the files have been designed to fit the Photon build size, you will need to load/orientate yourselves as you think will work for you. I have uploaded some pictures of the larger pieces to assist.. I’m afraid the upper torso, lower torso, neck and the base cannot be fitted to a Photon print plate . . I printed mine in FDM
The model is 1/6 scale and the height is 450mm to top of blade on helmet head.
Some of the armour is printed separately to allow both Resin or high res FDM printing, it also saves on supports!
2 different head versions, with this one, one is head and horns , but womt fit on resin printer nor will it print well on FDM . .so a version without horns and horns separate.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Recently I have been asked “why this is not printing? “ Or “This is full of holes when printed?” Etc. . . please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .

People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds . This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.

FDM requires raft/brim and supports all parts
Resin cant fit upper torso, lower torso, neck or bases into resin build plate . .all other parts are designed for Photon build size . .