Jewelry Box 1

An unusual jewelry box is a good idea for a gift and decoration at home, and this is one of those things that will show that buying a 3D printer is a good idea.
This Jewelry Box of classical shape, decorated with an elegant spire on which the Golden Cockerel sits, was designed specifically for trouble-free printing without supports with maximum productivity. The laconic form and smooth surface are rather simply ground during post-processing. Such a surface looks great with various painting methods and provides a beautiful game of glare and shadows.

Project page: https://3dladnik.wixsite.com/workshop/jewelrybox1?lang=en

Post-processing: grinding, chemical polishing with ethyl acetate.
Coloring: acrylic enamels and polyurethane varnish. It was painted with a brush.

Jewelry Box 1 dimensions: 160 x 160 x 290 mm.
Plastic consumption: 270 grams.

The casing is glued in three parts:
CasketBox1-Body.STL
CasketBox1-Bung.STL
CasketBox1-Ring.STL

The box cover is available in two versions:
1. One-piece lid - CasketBox1-Top.STL
2. A cover assembled from three parts (such parts are printed easier):
CasketBox1-Top1.STL
CasketBox1-Top2.STL
CasketBox1-Top3.STL

The Golden Cockerel is glued from two parts:
CasketBox1-GoldenCockerel-L.STL
CasketBox1-GoldenCockerel-R.STL

The cap spire is reinforced with a steel pin with a diameter of 2 mm and a length of 150 mm, on the protruding part of this pin protruding from the Golden Cockerel figurine.

The shown Jewelry Box 1 were printed on an FDM printer with a nozzle of 0.5 mm, a layer height of 0.2 mm from ABS plastic.