BJD 1/3 75MM HEAD 32 - BY SPARX

This file contains ONLY one head and cap . .Head 32 – Natta BJD doll face and expression. This Cap only fits Natta due to her face been thinner . .
A little bit more realistic but still stylized and older . .

These are all new heads/skulls designed from scratch, no remixing, STL’s OBJ files or other heads have been used in the designs intentionally. All designs have used either/and Internet photo’s, art work, my own designs etc. . . references for head sizes and fittings from various manufacturers.
For all these designs have been created at 1/3 BJD size, for 25mm neck joint, 18mm eyes you can scale them up or down to fit your doll body. Be aware that the ball joint and eye sockets will change! Also I have printed at 1/6 doll size on resin but at that size FDM will not form eyes at 2mm diameter!
This series of heads are designed to fit 115 x 65 x 155 resin build plate as well as FDM printers.

Dolls have 25mm ball socket & a slot for a Phincin Pin to enable heads to fit a variety of doll body’s.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
Info;
Lots of files for sale and free of BJD dolls heads. Unfortunately they are either very expensive or not scaled to fit smaller resin printers . .
Each head is very reasonably priced or free for the detail.
Each head is complete with a Head Cap
Heads are orientated for FDM and resin printers to use the least amount of supports as well as keep supports away from face. Please feel free to orientate them yourself . .
No Instructions with this one as All of the parts are orientated to print base ready to print with your favourite slicer . .
Other heads shown are available
https://cults3d.com/en/users/SparxBM/creations
All the parts have been printed and developed to print, A lot of prints have been produced to test design and fit. All heads have been fitted to dolls/painted etc without problems . .
orientated ready for FDM and Resin
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collections and friends but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .

parts orientated ready for FDM and resin see pics