Envy1 – Holli n Jess- BY SPARX

UPDATE 12/1/2020
Holli's head does not require a pin. The head has been replaced with a version that has no pin socket to stop any confusion.

from Concept/inspiration to Zbrush, Print, Paint . . in 6 days . . including having to go to work for 4 of them . . . my favorite two cartoon characters . . . female of course Holli Would from Cool World and Jessica you know THAT Rabbit . . all printed in Resin , Flesh, White and Clear . . Bases in ABS on FDM print . .
.Holli is 290mm high, Jess 310mm . .Paint finish left "cartoony" rather than lots of shade Enjoy

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All of the parts are orientated to print base ready to print with your favorite slicer . .

The individual files are FDM orientated for least support and strongest print orientation, as seen in the images.
ALL parts are cut files to fit build plate of small resin printers like the Photon, examples in images.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.The Torso’s and Head fit on Holli took 3 designs, The right leg on Jess is fitted in place with no pin as is shaped.

So 2 great statues for a few Euro's . .

Recently I have been asked “why this is not printing? “ Or “This is full of holes when printed?” Etc. . . please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .
People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds . This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.

all orientated correctly . .printed 1.6 20% fill speed 50, Red same on FDM, and for resin depends on resin!