FOLDING SUPPORT FOR SMARTPHONE OR TABLET TELEPHONE - Reason: Elephant ... Foldable support for mobile phone and small digital tablet - pattern: "Elephant".

This creation was born out of my daughter's need to use her Smartphone during her business trips for videoconferences or other ...

This two-position stand had to be practical, light, easily folded, collapsible, lockable, can be stored in a bag or suitcase, resistant to handling and shocks, and pretty to boot!

It has proved to be so practical that it has become a must-have item!

A little extra: a removable label allows you to personalize it.

To ensure that everyone finds what they are looking for, it has been divided into several themes.

This project is part of the "Animals" theme.

Other themes will be proposed in the near future.

It is a customizable folding stand for mobile phone and small tablet.

It consists of 4 distinct parts:

- a basis


- a back


- one side


- a removable label to personalize it

This support allows the feed wire to pass through for eventual loading.

A lug on the "Back" section locks the assembly in the folded position.

Object size :

Height: 15.5 cm

Width: 7 cm

Depth: 9.7 cm

Allowable thickness of the phone: 1.3 cm

We have created this foldable support for mobile phone further to our daughter's needs to help her during her business trips when using videoconferencing or others.

This support with its 2 positions needed to be practical, light, easily both foldable/unfoldable, lockable, put in a bag or suitcase, handlings resistant and shockproof, and also attractive!

It is so convenient and handy that it becomes an everyday key item!!!

A little bonus: A removable label for more customization.

This support is declined with various topics - there is something for everyone!

This project is part of the "Animal" topic.

More topics and models will be available soon.

This is a customized foldable support for mobile phone and small digital tablet.

It contains 4 separate parts. Those are as follows:

• grassroots

• a back

• opposite

• a removable label for more customization

This support allows the cable to pass through for phone plugging for recharge if needed.

A lug placed at the back locks all the parts together when folded.

Model sizes:

Length: 15.5 cm (approx. 6.10 inches)

Width: 7 cm (approx. 2.75 inches)

Depth: 9.7 cm (approx. 3.82 inches)

Acceptable mobile phone thickness: 1.3 cm (approx. 0.51 inches)

The project was carried out in white "PLA filament, 1.75mm AMAZON Basic".

- Nozzle temperature: 205°.


- Bed temperature: 70° C


- Filling: 100% full

Printing time :

- Base : 1h47 mn


- Back : 1h33 mn


- Face : 4h20 mn


- Label: 13 mn (The STL file corresponds to a blank label. It will be up to each person to customize it via his or her favorite CAD software.

3D file format: STL

This project is made of white filament "Filament PLA+, 1.75mm "SUNLU"

• Nozzle temperature: 205°.

• Bed temperature: 70° C

• Filling: 100%.

Printable time:

• Base: 1h47 mn

• Back: 1h33 mn

• Face: 4h20 mn

• Label: 13 mn (the STL file is a blank label. This is to be customized via a CAD software of your choice)

3d file format: STL