The Mandalorian Tracking fob

/!\ Update : Edite tracking fob+add Battery cover (only for led+battery version of the Tracking fob)

Tracking fob from the serie "The Mandalorian" for 3d printing !

Tracking fob from the series "The Mandalorian" for 3d printing !

"A positioning sensor was a device to know the position of a person. 4 years after the fall of the Galactic Empire, the bounty hunter guild used positioning sensors. The bounty hunter accepting the target would then take the positioning sensor and a tracking puck.

Tracking fobs were devices used by bounty hunters to track their quarries. The bounty hunter would return the fobs after capturing their bounty as proof of capture. In 9 ABY, the Bounty Hunters' Guild handed out tracking fobs to its hunters. A bounty hunter simply known as "the Mandalorian" returned his fobs after capturing all of his quarries."

Source: starwars.fandom.com"

/!\ Add version with battery+led placement, you need:

• SODIAL(R) 5pcs 2xCR2032 Battery

• Red LED (5cm, auto flashing)

/!\ Adding a version with battery placement+led, you will need :

• SODIAL(R) 5pcs 2xCR2032" Battery

• Red LED 5cm (preferably flashing)

2 parts to print/assemble (Tracking fob and antenna)

Size = 5 x 17 x 1.7 cm

My CURA settings :

Layer = 0.15mm


Wall tickness/Top bottom tickness = 1.2mm


Infill = 15


Support = Yes.