MacPi Mini G4 (Raspberry Pi 2 + 3 Case)

(please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs )

This is a Raspberry Pi case, designed (as close as plausible for me) 1:1 to the Mac Mini g4.

(This case supports the Raspberry Pi 2 + 3)

the case is designed to snap together, except for the bottom feet, that might need some glue to hold it in place, but there is a little cut out on the bottom of the bottom "shell" for aligning the part (the middle part might need some glue on the bottom, on the inside, to help it to keep in place.

please note, that the case is designed to support a fan(40mm X 40mm X 25mm) and heatsink (the fan placement is shown as the red coloured part in one of the pictures).

Most printers should be able to print this case.

for detailed help on how to put the parts together, please refer to the pictures.

PLEASE NOTE ! : that there is 2 versions of the frame/outer part/top, one is printed in 2 parts(frame top and frame open top), if you want to have to top made of glas or any other materiel or colour, then the rest of the print, for closer relations to the real mac mini g4, and the other one is made out of 1 piece, fr easier printing, and time saving.

please bear in mind, that there is an opening on the left side (when looked at from the front ) for cables and such, just like on the back.

if there is any flaws or problems printing this, please let me know ^^