Magnet Rubik`s Cube 3x3 / 3x3 Magnetic Rubik`s Cube

Rubik's Cube 3x3 FULLY FUNCTIONAL, suitable for all ages as it has a considerable size that does not put the youngest at risk. It can be printed with any type of filament.

For the assembly it is necessary to have 6 3mm metric ALLEN screws with a length between 20mm and 25mm. As well as 6 springs with an internal diameter of 3mm. All the necessary materials can easily be found in any hardware store. Washers can also be used for the start and end of the spring, in total 12.

It spins perfectly and it's a lot of fun. Easily repaired, dismantled and cleaned. It hardly needs any lubricant if it is done in PLA.

UPDATE: I have added the edges and corners with the option to put 10mm diameter x 3mm thick round magnets, they are sold in any 100.

Rubik's cube 3x3 COMPLETELY FUNCTIONAL, suitable for all types of ages due to it has a considerable size that does not put the little ones at risk. It can be printed with any type of filament.

For mounting it is necessary to have 6 ALLEN screws 3mm diameter with a length between 20mm and 25mm. As well as 6 springs with 3mm inner diameter. All the necessary materials can be found easily in any hardware store. Washers can also be used for the start and end of the springs, in total 12.

It spins perfectly and is very fun. Easily repairable, removable and cleanable. Unnecessary lubricant if it is done in PLA.

UPDATE: I have added the edges and corners with the option to put round magnets 10mm in diameter x 3mm thick. It works great.

speed/velocity: 30mm/s

layer: 0,2

Amount of pieces: 8x CORNER, 6x CUBE CENTER, 6x CENTER LID, 1x CORE, 12x ARISTA

The only piece that needs supports is the ARISTA, the rest of the pieces can be made without supports perfectly.

The only piece that needs supports is the ARISTA, the rest of the pieces can be made without supports perfectly.