Trump AR15 Pistol grip handle, Airsoft, Mil Spec, novelty

These novelty AR grips are sure to make your friends chuckle! They have been designed off of a variation to a M16A1 pistol grip. These feel great and look awesome too! Your original screw can be used but due to wall thickness the original lok washer must be narrowed to fit the opening. will fit most AR platform rifles and airsoft replicas.

If you printed them in a 50/50 mix of sla uv resins (siraya tech tenacious and elegoo black) they will withstand enough abuse at the range. I would not use them on a combat rifle but for a range gun they are awesome!

be sure to check out my other AR grip designs.

I retain all rights to these files and they are only to be used for personal use. They are not to be used for sale or commercial use.

Enjoy these bad daddies and be sure to post your build pics!

side note: I am neither a supporter or opponent of our president Donald Trump, these are designed as a novelty.

Change bottom exposure time from 70 to 75 seconds and print them with the bottom to the build plate at a bit of an angle. I usually fit 2 per the elegoo mars build plate.cure in a light box, wash with soap and water and oil with normal gun oil od machine oil when cured. a uv protective clear coat can be applied if you so choose before oiling.