Goku Genkidama Clock for 3D printing and laser cutting

Goku Genkidama wall clock.

It includes the PNG image file of the clock, it also includes the 2 Stl files of 3D printing and the same files in vectorial version in DXF format for those who choose to make the clock in laser cutting.

Includes custom needle design as shown in photo.

The way I made the clock on the next one.

The image is printed on photographic adhesive paper in A3 format and cut to size and then glued to the base printed in 3d or laser cut depending on the manufacturing method used. To conclude and protect the print, a transparent vinyl sheet can be added on top to give a better finish to the watch.

Goku Genkidama wall clock.

Includes PNG image file of the clock, also includes the 2 3D printing Stl files and the same files in vector version in DXF format for those who choose to make the clock in laser cut.

Includes custom needle design as seen in the photo.

The way I made the clock the following.

The image is printed on adhesive photo paper in A3 format and cut to size and then pasted on the base printed in 3d or laser cut according to the manufacturing method used, to conclude and protect the print can be added over a transparent vinyl sheet to give the watch a better finish.

20% infill

Layer Height 0.2 or below

Unsupported