Elegant neckle Natural Essential Oil Nasal Inhaler - use with High Quality Cotton Wicks - Best for Aromatherapy
An inhaler worn around the neck, always with itself, always under the nose.
Small size practical and discreet
Fairly wide inhalation port
Easy to remove and reusable
Energizing & Invigorating Inhaler: The inhaler can be filled with your choice of essential oil and is completely refillable.
It will open your nasal hole and give you a cool fresh feel.
So, breathe your favorite essential oil by soaking the cotton wick with 3 to 4 drops.
Helps Better Breathing: The inhaler when used will fill your nose and help you upgrade your breathing while providing you
the benefits of the essential oil you filled it with. It allows the oil to go directly into your system and throughout your body.
Take Your Essential Oils on The Go: Little enough to fit in your pocket, handbag or on the plane, these aromatherapy nasal
inhalers are ideal for carrying with you all over the place! Take them to the workplace or at school and appreciate a stimulating
energy kick whenever needed.
Easy to Use: Simple operation is all you need in this day to day busy life. To inhale the aromatic effect of essential oils just simply unscrew the top cap,
bring the inhaler close to your nose and enjoy the therapeutic benefits of essential oils anywhere anytime.
That aroma inhaler are in just fine size for purses, pockets, bags, and are suitable for carrying them with you when having trips, going abroad, etc.
Easy natural relief-Harness the power of essential oils for breathing treatments, allergy relief, and other common sinus troubles.
Perfect natural alternative to traditional nasal inhalers.
The sponge wick will be sealed tightly within the inhaler thus to lengthen the lasting time of scent, smell, aroma and so on,
These inhalers can be used again and again,
just remove the cap and add more oils to the wick inside.
Ideal for photopolymer printing
Method: one drops a maximum of 12 to 15 drops on the cotton swab and stores it in the tube, close and you're done.
The inhaler works effectively for around three weeks. One can always top up again by re-opening the tube.
You can put together your favorite inhaler in this way:
With a stuffy nose / Cold :Anise (star) , Basil , Cajeput , Cedar , Lemon , Citronella ,
Pine (Grove) , Eucalyptus , Ginger, Juniper , Cinnamon (bark) , Clove , Laurel, Lavender ,
Lemongrass , Lime, Marjoram , Myrrh , Oregano, Palma Rosa , Peppermint , Sage, Tea Tree , Thyme , Incense
For hay fever : Cajeput , Cedar , Lavender , Marjoram , Peppermint , Sage, Tea Tree
For motion sickness : Basil , Ginger, Lavender , Peppermint , Orange (sweet)
For concentration problems / study aid / exam stress: Basil , Cedar , Lemon , Ginger, Grapefruit ,
Juniper , Lavender , Lemongrass , Marjoram , Peppermint, Rosemary , Sandalwood, Orange, Thyme
For tiredness : Basil , Bergamot , Cedar , Lemon , Citronella , Pine ( Ginger ) , Ginger, Geranium ,
Juniper , Coriander, Lavender , Neroli, Nutmeg, Pepper, Peppermint , Pomelo, Rosemary , Sandalwood, Orange, Thyme
Stress, tension, anxiety : Basil , Cedar , Lemon, Pine (Grove) , Geranium , Grapefruit , Juniper ,
Coriander, Lavender , Marjoram , Neroli, Nutmeg, Palmarosa , Patchouli , Peppermint , Rosemary , Sandalwood, Thyme , Incense , Ylang Ylang
Cotton tubes for oil and oil purchased separately
Enjoy the observed result.
--
You can make the product on a 3D printer or cnc machine from plastic, glass, clay, bronze, silver and any materials.
the model can also be made using cnc machine turning wood. Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.
The size is shown in the scetch or drawings.
All real sizes you can see in the photos.
the model is easily scaled to the desired size when using your 3D printing software
Render scene is not included.
Suitable for graphical projects and 3D print or cnc projects.
Everything can be seen in the photo.
the model is easily scaled in any program for printing, etc.
The model can be printed as a 3D model, as well as produced on CNC machines.
Made in solidmade, tested in the manufacture of the master model of the product.
Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.
This is a fully solid-state version for 3d-print, this is not a scan version.
At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine
It is possible to model anyone another model according to your size or drawings and sketches.
ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.
The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.
Placement of models on the printer table when printing is shown in the photo
the Cura slicer shows a scaled-down model using the slicer itself.
Its files For CNC Routers and 3D printers.
Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.
All copyrights to these hosted models belong to the author.
Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.
Non-commercial use only.
Attribution-NonCommercial CC BY-NC