Spring loaded Egg Poker
Spring loaded Egg Poker
3D
Published 2020-02-23T08:35:13+00:00
My mom gave me an old broken retro egg poker / egg puncher thing that she have had for 50 years. This is my 3d printable remix on its concept.
Use a 15mm Ø8mm spring
Cut a 15mm lenght tag/needle Ø.8mm to 1mm.
Assembly:
1. put the spring in the "fod"
2. push the needle in the "stift"
3. put the "stift" in the "kop" from the top down
4. put the "kop" and "stift" in the "fod"
5. with a tool (that does not bend the needle) push the "stift" down into the slot in the "fod", press fit.
Lay down "stift" when slicing to give strenght in the correct directions.
Print "kop" in the standing orietation as given. Angles does not exeed 45%.
No support is needed... don't know why MyMiniFactory algo insists on it...
| Date published | 23/02/2020 |