Longboard Riser

This is many risers. The ones like 1_6 means it is 1/6th of an inch thick. The angled risers start at 1/8th of an inch for added strength and wedge/dewedge whatever percent it is. Mounting holes are slightly oversized to compensate for errors, and it is an eight mounting hole design to allow for easy wedging and dewedging. To reduce height change, I reccomend using the lower holes as it will change the ride height less. If you are struggling with wheelbite I would reccomend using an aditional riser to shim it up also then so yeah. To avoid having a lot of posts, I just compiled them all in one, so you just download the file then pick and choose what after that. This is free to distribute and remix, just credit me at u/Not_A_Paid_Account then. I am not liable for any injury or harm caused by these risers, use at your own risk then so yeah. Hopefully this helps some then so yeah.