Designed by
Chinde
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
These struts are designed to stabilise the Anet A6 and to prevent it moving on it's bench.
I found that after adding more tension to the Y Belt that the whole printer would "flex" forward, to fix this I added these 8mm threaded struts which hold the printer in the correct position at all times.
These have saved me a fair bit of bed levelling by stabilising the positions of the uprights relative to the Y axis front belt plate.
Each 8mm threaded strut is about 40cm long but I would advise buying a 1m length and cutting to the right length in place after bolting everything up.
Design Files
File Size
SupportUpperRight.stl
68.7 KB
SupportUpperLeft.stl
68.9 KB
AneA6t_Left_Right_Base_Clamp_and_Top_Struts.stl
347 KB
SupportLowerLeft.stl
105 KB
SupportLowerRight.stl
105 KB
Comments