HIGH POWER AIRGUN SILENCER .30!

HIGH POWER AIRGUN SILENCER CALIBER .30 / 7,62 mm!

Based on the popular shockwave design the new HIGH POWER AIRGUN SILENCER is made to withstand the higher pressures and air volumes from high kinetic energy/velocity airguns.

TWO LENGTHS IS INCLUDED in every caliber! 190 mm and 260 mm for those of you who demand maximum sound moderating.

The silencers are equipped with lamels reinforcements making them much more resistant to high pressure and rough handling / drops on the floor. The shell and baffles are also thicker ensuring durability.

A threaded nut is included in the package. Use it as an end stop on the barrel or as a thread calibration tool.

The inner hole / trajectory is cone shaped that insures no impacts while maintaining tight tolerances.

Available in calibers:
.177” / 4,5 mm
.22” / 5,5 mm
.25” / 6,35 mm
.30” / 7.62 mm

Lengths and diameters:
190 mm x 40 mm
260 mm x 40 mm

Fully functional, 1-piece strong and dependable construction ensuring durability with superior sound moderating characteristics and repeatable accuracy.

Constructed in Sweden by experienced machine engineers.

For best results when 3D-printning:

• Use a layer height of 0,1 – 0,15 mm.
• Set the printerhead velocity to maximum 40 mm/sec, for decreased vibrations.
• Suitable printing materials: PLA tough or regular PLA.
• The silencer must be printed with the exit hole downwards and the threads up.
• DO NOT USE SUPPORTS, the overhang is well within limitations.
• If your printer has build plate adhesion problems, use a brim.