ballet dancer foot arch stretcher 3d print and cnc

ballet dancer foot arch stretcher 3d print and cnc

The innovative design allows you to stretch your foot in the most dynamic and correct way in a greater variety of leg positions
and movements. You can use the Ballet Foot Stretch device the same way as the Original, controlling and manipulating the stretch
with the long handle, or hands-free by removing the detachable handle. The hands-free facility allows a greater diversity of exercises
and freer movements favouring rhythm and dynamics. It also allows performing exercises standing at the barre! With the leg
strap you can tie the foot stretcher on to the upper ankle. This allows your knee complete freedom to bend
and stretch, enabling you to perform a greater variety of dynamic floor exercises, handsfree. There are so many options!

The foot arch stretcher can be made of qualified pine wood, with fine grinding, plastic as abs tpu or pla,

and offers a soft handle feeling and intimate care.
It can shape your arch efficiently after regularly use.
Professional ballet instep shaper, mainly focuses on toes and legs and feet
instep nest pressure, push and pull in the instep to feel the stretch function of feet muscles and ligaments.
The solid wood or plastic provides a high toughness, wear-resistant and durable to use.

Perfect for ballet, Latin belly, yoga dancers to exercise their insteps.

ballet danseur pied arc civière impression 3d et cnc

La conception innovante vous permet d'étirer votre pied de la manière la plus dynamique et correcte dans une plus grande variété de positions des jambes
et mouvements. Vous pouvez utiliser l'appareil Ballet Foot Stretch de la même manière que l'original, en contrôlant et en manipulant l'étirement
avec la longue poignée, ou mains libres en retirant la poignée amovible. La fonction mains libres permet une plus grande diversité d'exercices
et des mouvements plus libres favorisant le rythme et la dynamique. Il permet également d'effectuer des exercices debout à la barre! Avec la jambe
sangle, vous pouvez attacher la civière du pied à la cheville supérieure. Cela permet à votre genou de se plier complètement
et d'étirement, vous permettant d'effectuer une plus grande variété d'exercices dynamiques au sol, mains libres. Il y a tellement d'options!

La civière d'arche de pied peut être faite de bois de pin qualifié, avec un broyage fin, en plastique comme abs tpu ou pla,
et offre un toucher doux et des soins intimes.
Il peut façonner efficacement votre arcade après une utilisation régulière.
Shaper de cou-de-pied professionnel, se concentre principalement sur les orteils, les jambes et les pieds
la pression du nid du cou-de-pied, poussez et tirez sur le cou-de-pied pour ressentir la fonction d'étirement des muscles des pieds et des ligaments.
Le bois massif ou le plastique offre une ténacité élevée, résistant à l'usure et durable à utiliser.

Parfait pour le ballet, le ventre latin, les danseurs de yoga pour exercer leurs cou-de-pied.

Balletttänzer Fußbogen Bahre 3D-Druck und CNC

Das innovative Design ermöglicht es Ihnen, Ihren Fuß auf dynamischste und korrekteste Weise in einer größeren Vielfalt von Beinpositionen zu dehnen
und Bewegungen. Sie können das Ballet Foot Stretch-Gerät genauso wie das Original verwenden und die Dehnung steuern und manipulieren
mit dem langen Griff oder freihändig durch Entfernen des abnehmbaren Griffs. Die Freisprecheinrichtung ermöglicht eine größere Vielfalt an Übungen
und freiere Bewegungen, die Rhythmus und Dynamik begünstigen. Es erlaubt auch Übungen in der Barre durchzuführen! Mit dem Bein
Mit dem Gurt können Sie die Fußtrage am oberen Knöchel befestigen. Dadurch kann sich Ihr Knie völlig frei beugen
und dehnen, so dass Sie eine größere Auswahl an dynamischen Bodenübungen freihändig durchführen können. Es gibt so viele Möglichkeiten!

Die Fußgewölbentrage kann aus qualifiziertem Kiefernholz hergestellt werden, mit feinem Schleifen, Kunststoff als abs tpu oder pla,
und bietet ein weiches Griffgefühl und intime Pflege.
Es kann Ihren Bogen nach regelmäßigem Gebrauch effizient formen.
Professioneller Ballett-Spannformer, der sich hauptsächlich auf Zehen, Beine und Füße konzentriert
Rist Nest Druck, drücken und ziehen Sie den Rist, um die Dehnungsfunktion der Fußmuskeln und Bänder zu spüren.
Das Massivholz oder der Kunststoff bieten eine hohe Zähigkeit, Verschleißfestigkeit und Langlebigkeit.

Perfekt für Ballett-, Latin-Bauch- und Yoga-Tänzer, um ihren Spann zu üben.

bailarina de ballet pie arco camilla impresión 3d y cnc

El diseño innovador le permite estirar el pie de la manera más dinámica y correcta en una mayor variedad de posiciones de las piernas.
y movimientos. Puede usar el dispositivo de estiramiento del pie de ballet de la misma manera que el original, controlando y manipulando el estiramiento
con el mango largo, o manos libres quitando el mango desmontable. La función manos libres permite una mayor diversidad de ejercicios.
y movimientos más libres que favorecen el ritmo y la dinámica. ¡También permite realizar ejercicios de pie en la barra! Con la pierna
correa puede atar la camilla del pie a la parte superior del tobillo. Esto permite que su rodilla tenga total libertad para doblarse
y estiramiento, lo que le permite realizar una mayor variedad de ejercicios dinámicos de piso, manos libres. ¡Hay tantas opciones!

La camilla del arco del pie puede estar hecha de madera de pino calificada, con molienda fina, plástico como abs tpu o pla,
y ofrece una sensación de tacto suave y cuidado íntimo.
Puede dar forma a su arco de manera eficiente después de su uso regular.
Formador de empeine de ballet profesional, se enfoca principalmente en los dedos de los pies, piernas y pies.
presión del nido en el empeine, empuje y jale el empeine para sentir la función de estiramiento de los músculos y ligamentos de los pies.
La madera maciza o el plástico proporcionan una alta tenacidad, resistencia al desgaste y durabilidad de uso.

Perfecto para bailarines de ballet, vientre latino, yoga para ejercitar sus empeine.

dançarina de balé pé maca arco impressão 3d e cnc

O design inovador permite esticar o pé da maneira mais dinâmica e correta em uma variedade maior de posições das pernas
e movimentos. Você pode usar o dispositivo Ballet Foot Stretch da mesma maneira que o Original, controlando e manipulando o alongamento
com a alça longa ou com as mãos livres, removendo a alça removível. O recurso de mãos livres permite uma maior diversidade de exercícios
e movimentos mais livres favorecendo ritmo e dinâmica. Também permite a realização de exercícios em pé na barra! Com a perna
Você pode amarrar a maca do pé no tornozelo superior. Isso permite ao seu joelho total liberdade para dobrar
e alongamento, permitindo que você execute uma variedade maior de exercícios dinâmicos no chão, viva-voz. Existem tantas opções!

A maca do arco do pé pode ser feita de madeira de pinho qualificada, com retificação fina, plástico como abs tpu ou pla,
e oferece uma sensação de alça macia e cuidados íntimos.
Ele pode moldar seu arco de forma eficiente após o uso regular.
Modelador profissional de peito do pé para ballet, principalmente para dedos e pernas e pés
pressão do ninho do peito do pé, empurre e puxe o peito do pé para sentir a função de alongamento dos músculos e ligamentos dos pés.
A madeira maciça ou plástico oferece alta tenacidade, resistência ao desgaste e durabilidade.
Perfeito para dançarinos de balé, barriga latina e ioga para exercitar seus pés.

---

Choose a filament of any color and make your stretcing dreams beautiful and unique.

Model initially created by solidmade.

---

You can make the product on a 3D printer or cnc machine from plastic, glass, steel, clay and any materials.
the model can also be made using cnc machine turning wood.Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.

The size is shown in the scetch or drawings.
the model is easily scaled to the desired size when using your 3D printing software

Render scene is not included.

Suitable for graphical projects and 3D print or cnc projects.

Everything can be seen in the photo.

the model is easily scaled in any program for printing, etc.

The model can be printed as a 3D model, as well as produced on CNC machines.

Made in solidmade, tested in the manufacture of the master model of the product.

Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.

This is a fully solid-state version for 3d-print, this is not a scan version.

At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

It is possible to model anyone another model according to your size or drawings and sketches.

ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.

The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.

Its files For CNC Routers and 3D printers.

Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

All copyrights to these hosted models belong to the author.

Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.

Non-commercial use only.

Attribution-NonCommercial CC BY-NC