Bombshell Pinups – 03 WonderWoman- by SPARX

Number 3 of a planned series of 40’s style pinup up art inspired by aeroplane nose art and DC’s Bombshell super heroines. There’s just not enough Varga, style pinup models around . . If cartoon figures are not to your style, an alternative interchangeable Human head is included . .
The model was designed to have the bomb lasso-d . .but as the rope does not print well, a piece of filament or string can ne used as in photo’s.
When designing the human head I gave her long hair . . liked it so much I designed another toon Head with long hair . . so 3 heads with this one and a bonus bust/head stand to keep your spare heads on . . .
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All of the parts are orientated to print base ready to print with your favourite slicer . .

All parts are cut files to fit build plate of small resin printers like the Photon, examples in images SLA orientated for least support and strongest print orientation, as seen in the images.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
The model is 1/6 scale and is approx. 280mm tall/long on its full base.
Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.
People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds when using FDM. This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.

TIPS:
Resin Printing;
Wall 3.00, arms to avoid fingers having cavity.
All other parts hollow at 2.70mm
All parts except heads on FDM were print tested at 0.16 speed 50
Heads were printed 0.12 speed 50
Both legs printed at 012 speed 50 to capture detail of leather.
ALWAYS dry assemble and “trim” parts prior gluing.
Paint Body/torso before glue arms . . easier
Completely assemble Body do not glue to base till the Bomb and base are combined and finished.