Harley Davidson Motor Cyles Nozzle

Harley Davidson Motor Cycles for hookah/shisha, is so easy to assembly, using superglue, and assembling is more easy for custom it with our favourite filaments.

Harley Davidson Motor Cycles bong/shisha mouthpiece, easy to assemble and print, so it's easy to customize with our favorite strands.

NO SUPPORTS

ENGLISH

Body.stl ----------> 0.16 layer, 15% infill (PLA)

FlexTube.stl-----> 0.16 layer, 100% infill

MiddleTube.stl--> 0.2 layer, 100% infill (PLA)

OPTION 1

x2OrangeHarley.stl-------> 0.2 (or less) layer, 20% infill, important print x2 for 2 sides and if possible use 0.4 or less nozzle and low velocity.

x2WhiteHarley.stl-------> 0.2 (or less) layer, 20% infill, important print x2 for 2 sides and if possible use 0.4 or less nozzle and low velocity.

OPTION 2

x2HarleyPlate.stl-------> 0.2 (or less) layer, 20% infill, important print x2 for 2 sides and if possible use 0.4 or less nozzle and low velocity.

SPANISH

Body.stl ----------> 0.16 layer, 15% padding (PLA)

FlexTube.stl-----> 0.16 layer, 100% padding (Flexible)

MiddleTube.stl--> 0.2 layer, 100% PLA

OPTION 1

x2OrangeHarley.stl-------> 0.2 (or less) layer, 20% fill, important to print x2, one for each side, if possible use a nozzle of 0.4 or less and a slow speed.

x2WhiteHarley.stl-------> 0.2 (or less) layer, 20% fill, important to print x2, one for each side, if possible use a nozzle of 0.4 or less and a slow speed.

OPTION2

x2HarleyPlate.stl-------> 0.2 (or less) layer, 20% fill, important to print x2, one for each side, if possible use a nozzle of 0.4 or less and a slow speed.