AIRSOFT GRENADE LANCE (with or without COVID-19)

Hi,

Here's an airsoft grenade launcher that you can attach to your replica using the top rail. The lower rail will allow you to add accessories, wrist, ...

Features:

• range approx. 50-70m,

• power approx. 0.5-0.7 joules (with 0.25g Ø6mm ball),

• Ø6mm ball (airsoft ball),

• top mounting rail,

• lower accessory rail,

• 122mm long, 66mm high and 41mm wide,

• weight: approx. 100g,

• 4-shot magazine, shoots up to 9 pellets simultaneously,

• type of propulsion: balloon (see blue on photos).

You'll need to buy a standard-size balloon and 4 non-standard M3 CHC screws with 4 non-standard M3 nuts.

For assembly: please look at the photos, the balloon must be placed on the back of the grenade launcher, see photo (in blue).

To fire: start by turning the gun upwards at 45°, then remove the pin to engage it in the 2 holes. The balls will fall into the barrel, so you can shoot the ball with the balls inside, once stretched, let go which will allow you to fire.

Quite simply.

To reload: turn the gun upside down.

For the body of the weapon, I offer a version with the initials COVID-19 and one without. The choice is yours.

Ps: As always, if you come privately to my e-mail, you'll get -20% on all my stl.

On this good print.

Default setting

• Accuracy 0.2 (minimum, otherwise you'll have to do a lot of sanding),

• Pla at 75%, but 65% should suffice,

• Printing at 11h20,

• Nozzle 0.4,

• Pay attention to the correct setting of this axis.

Machine : Creality ender 3 improved

Software: Cura, Catia V5R20