Punisher Skull Mag Release

Mag release for the ar15 in the shape of a punisher skull. This will work on all AR15 style guns and should work on m16/ar15 style airsoft guns. It is a little taller than a regular mag catch and that's only because I wanted space for the threading and to be able to cover everything back up so it looks just like a punisher skull sticking out of your rifle.

Due to the small 10-32 thread size, you will need to tap the print yourself. I've included an amazon link below for a tap, it is not an affiliate link and I'm only providing it to help you create a cool part for your rifle/airsoft gun.

https://amzn.to/30YJwyu

FDM printers: Print with the face down so there is no need for support in the threading cavity. 100% infill and for best results, use .1mm layer heights. Smaller nozzles are preferred due to size. Don't use a raft, this print is small and shouldn't easily warp. Should be good printed with any type of filament.

Resin printers, print with the face down, don't hollow this print out and keep it at 100% infill. You can either choose to have this built on the build plate or create supports for it, just be mindful that the teeth of the skull will likely need their own supports if you do place supports. Common resins used in model making should do perfectly fine printing this, although I recommend siraya tech's fast white.