3d mini 220 printer

this printer is a remix of the Original Prusa mini, it has been adapted to be used with a printing bed of 220x220mm, all parts (except 2) have been redesigned to be assembled using aluminum profiles vslot 2040, 8mm spindle.

in my assembly all the electronics and its box, as well as the power supply have been taken from an anet a8 plus, but you can adapt it to your parts or things you have unused.

there are two types of hotend that can be used, so you will find 2 types of files for hotend (V6 or anet et4).

all the screws to use are M5 or M3 in different sizes and some nuts for M3. the aluminium profiles should have 5mm threads at the ends and some will require additional holes for mounting, so please take a look at the pictures.

if you have any questions leave your comments or send a message.

if any of this remix infringes any patent I will be attentive to your comments and will make the necessary corrections.

• 13 printed pieces * .stl files (choose the files according to your V6 or et4 hotend)

• Aluminium profile 3 Vslot 2040 of 400mm length.

• 1 aluminium profile Vslot 2040 of 116mm length.

• 4 smooth rods 8 mm x 420 mm long.

• Shaft 8 mm x 380 mm long.

• 4 Nema 17 engines.

• 3 meter x 6 mm belt.

• 3d printer electrical parts (extruder, cables, hotend, motherboard, power supply, display, electronic box).

• Hot bed 220x220mm.

PLA or PETG material according to availability or preference.

50% gyro fill.

Layer height 0.28

Some parts may require supports.