Skip to content

FULL KIT Anycubic Chiron to improve your prints with new head 5015, linear supports, feets, etc. Chiron -> RCV Mod (box for hotend, Direct Drive BMG mount, linear, E3DV6 or mk10,Marlin 2.0.7.2 ,120mm Fan for tmc, feets...

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.4/5 (8 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 21.6k views
  • 17 likes
  • 9 downloads
License
3D design format
ZIP Folder details Close
  • KIT Direct Drive, linear for RCV MOD (Vers.1.8 february 2021).zip
    • box for Stepdown amazon/Corps1.stl
    • box for Stepdown amazon/Corps2.stl
    • Boxing Hotend/V8 BOWDEN/Capture.PNG
    • Boxing Hotend/V8 BOWDEN/V8 BOWDEN.stl
    • Boxing Hotend/V8 Direct Drive V2 RCV MOD/Direct Drive V2 RCV MOD.stl
    • Boxing Hotend/V8 Direct Drive/V8 Direct Drive BMG Left.factory
    • Boxing Hotend/V8 Direct Drive/V8 Direct Drive RCV MOD.stl
    • Cable Trunking/arm wire X bottom.stl
    • Cable Trunking/arm wire X Top.stl
    • Cable Trunking/cable chaine X Clips.stl
    • Cable Trunking/cable chaine X.stl
    • Feets/Kit feets.stl
    • FIRMWARE/8bits song for add to your gcode/astronomia.gcode
    • FIRMWARE/8bits song for add to your gcode/badguy.gcode
    • FIRMWARE/8bits song for add to your gcode/bumblebee.gcode
    • FIRMWARE/8bits song for add to your gcode/doom.gcode
    • FIRMWARE/8bits song for add to your gcode/green greens.gcode
    • FIRMWARE/8bits song for add to your gcode/ilventodoro.gcode
    • FIRMWARE/8bits song for add to your gcode/iphone.gcode
    • FIRMWARE/8bits song for add to your gcode/kantotrainer.gcode
    • FIRMWARE/8bits song for add to your gcode/macintoshplus.gcode
    • FIRMWARE/8bits song for add to your gcode/Mario 3.gcode
    • FIRMWARE/8bits song for add to your gcode/mario.gcode
    • FIRMWARE/8bits song for add to your gcode/mario2.gcode
    • FIRMWARE/8bits song for add to your gcode/megalovania.gcode
    • FIRMWARE/8bits song for add to your gcode/mii.gcode
    • FIRMWARE/8bits song for add to your gcode/Pokemon opening.gcode
    • FIRMWARE/8bits song for add to your gcode/rhapsody.gcode
    • FIRMWARE/8bits song for add to your gcode/rickroll.gcode
    • FIRMWARE/8bits song for add to your gcode/sandstorm.gcode
    • FIRMWARE/8bits song for add to your gcode/star wars imperial.gcode
    • FIRMWARE/8bits song for add to your gcode/start1.gcode
    • FIRMWARE/8bits song for add to your gcode/takeonme - Intro.gcode
    • FIRMWARE/8bits song for add to your gcode/takeonme.gcode
    • FIRMWARE/8bits song for add to your gcode/treasurechest.gcode
    • FIRMWARE/8bits song for add to your gcode/yoshi.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDBed/PID Tune Bed 60.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDBed/PID Tune Bed 70.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDBed/PID Tune Bed 80.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDBed/PID Tune Bed 90.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDHotend/PID Tune Hotend 190.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDHotend/PID Tune Hotend 200.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDHotend/PID Tune Hotend 210.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDHotend/PID Tune Hotend 220.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/PIDHotend/PID Tune Hotend 230.gcode
    • FIRMWARE/copy to root SDCARD/Marlin Menu/Reset EEPROM.gcode
    • FIRMWARE/firmware linear rails tmc2209.hex
    • FIRMWARE/PrusaSlicer_config_bundle.ini
    • free from thingivers for Z/Z_axis_stepper_spacer_v1.stl
    • MK10 Support/v3.stl
    • Mount E3D V6 v3/Support E3D V6 v3.stl
    • mount FAN 120mm for motherboard/support fan 120mm chiron v2.stl
    • Rail Lineaire/X/full mount MGN12C X +for the belt X V2.stl
    • Rail Lineaire/X/full mount MGN12C X +for the belt X.stl
    • Rail Lineaire/Y/for the belt Y.STL
    • Rail Lineaire/Y/mount MGN12H Y v1.stl
    • Raspberry Mount/Corps1.stl
    • ring top filament v1.stl
    • Screen protect RCV MOD.stl
    • SLICER/Profil Slicer/PrusaSlicer_config_bundle.ini
    • SLICER/prusa3d_win_2_3_0.exe
    • Support Bobine/V1/ecrou.stl
    • Support Bobine/V1/support.stl
    • Support Bobine/V1/vis.stl
    • Support Bobine/V2/barre.stl
    • Support Bobine/V2/dessous.stl
    • Support Bobine/V2/droite.stl
    • Support Bobine/V2/Gauche.stl
    • Support Bobine/V2/separateur.stl
    • Support PTFE/tube ptfe support.stl
    • Support Rideau/Rail rideau v3.stl
    • tunnel Aircooling TMC fan 60mm ( i don t use, i prefere 120mm fan)/Corps1.stl
    • tunnel Aircooling TMC fan 60mm ( i don t use, i prefere 120mm fan)/Corps2.stl

Learn more about the formats
Last update 2021-02-21 at 19:12
Publication date 2020-10-31 at 15:32
Design number 220349
Spelth

Spelth

3D printer file info

3D model description

i can give help to use it.

Contact me by mail :
spelth.gualdwine@gmail.com

or Facebook:
Spelth Gualdwine

UPDATE 21/02/2021

new improve headtools, linear X mopunt V2 and firmware and prusa slicer profil

IN THE KIT
*Roll support
*Linear X and Y support MGN12 C and H
*HeadTool Direct Drive Double Fan 5015
*HeadTool Direct Drive Single Fan 5015
*HeadTool Bowden Double Fan 5015
*Filament Way on the top
*box for step down
*Special Feet for replace Chiron feets mount ( improve stability)
*MK10 Support
*E3DV6 support
*cable trunking for X axis

*Screen Protect Named RCVMOD

UPDATE 30/01/2021
ADDED IN THE FULL KIT NEW TOOLHEAD DIRECT DRIVE

https://cults3d.com/en/3d-model/various/anycubic-chiron-direct-drive-bmg-hotend-box-single-5015-and-magnetic-support-for-the-probe-rcv-mod

UPDATE 17/12/2020
1.5
*New way for Filament

UPDATE 02/12/2020
V1.4
*New Support for linear X with good holes for mount the hotend E3D V6
*PrusaSlicer and my profile is share with you. Improve all prints and it helps to change color very easy
*New Marlin 2.0.7.2 HEX ready to flash
*Filament spool holder ( 2 versions )

UPDATE 24/11/2020
V1.3
*New Box Head hotend support Direct Drive v8 5015
*New Rail Mount for X axe

*New Marlin 2.0.7.2

For question, support, contact me by mail Spelth.gualdwine@gmail.com
Or by facebook messenger Spelth Gualdwine.

FULL KIT Anycubic Chiron to improve your prints. Chiron -> RCV Mod (box for hotend, Direct Drive BMG mount, linear, E3DV6 or mk10,Marlin 2.0.7.2 ,120mm Fan for tmc, feets...
Retractation around 2mm /speed at 40mm/s
My ptfe capricorn is 65mm

For get only the Head Box Hotend BOWDEN or DIRECT DRIVE 5015 fan

https://cults3d.com/en/3d-model/various/anycubic-chiron-direct-drive-bmg-hotend-box-double-5110-and-magnetic-support-for-the-probe-rcv-mod

Or

https://cults3d.com/en/3d-model/various/anycubic-chiron-hotend-box-double-5110-and-magnetic-support-for-the-probe

All of my work for the chiron is here, the kit for upgrade the chiron to my mod : RCV mod .
Best box for hotend with double fan 5015 for cool the part and keep original fan for hotend, on the top the direct drive mount is possible ( 2 version of the box are avaible) and keep the magnetic support for the prob.
Better stability and setting for x and y with linear, a mount very easy for the 120mm for cool the tmc. i Give my firmwares Marlin 2.0.7.2 with the pack for differents mount (tmc , linear rail or not etc ). Only work with it.

If need help contact me by mail facebook : Spelth gualdwine.

Others of my designs :

https://cults3d.com/en/users/Spelth/creations

Tout mon travail pour le chiron est ici, le kit pour mettre à niveau le chiron vers mon mod: mod RCV.
Meilleur boîtier pour hotend avec double ventilateur 5015 pour refroidir la pièce et garder le ventilateur d'origine pour hotend, sur le dessus le montage direct drive est possible (2 versions de la box sont disponibles) et garder le support magnétique pour le prob.
Meilleure stabilité et réglage pour x et y avec linéaire, un montage très facile pour le 120mm pour refroidir le tmc. i Je mets mes firmware avec le pack selon la config que vous aurez faits, tmc ou pas sur l extrudeur, rails linéaires ou non etc, le fichier hex et le dossier vscode sont tous àl"interrieur du zip. Travaillez seulement avec.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.