Mask With lower filter inlet

Jorge Moreno Nieto, [31.10.20 19:50]

Mask printed on PLA plastic with filters purchased from Amazon PM 2.5 has the advantage of adapting perfectly to each person by immersing it in hot water and then adapting it to the face, that allows you not to need to cover the nose and leave it largely free solved the common problem annoying and damage of the masks conventions, also has the advantage over the fabric, that the water that accumulates both on the surface, (by external drops) as well as by those of the vao itself are not a focus of virus culture when breathing again through the accumulated drops, in addition the entry of air is from below preventing the entry of the drops that come from the front, to be able to adapt to the face of each person close the perimeter better than those of fabrics in addition to ensuring that the air you breathe through the filter to be all the contour of waterproof plastic. You can personalize a logo or word on the filters.

Printed with Prusa MMU PLA, configure red extruder for perimeters, and other extruder white color surfaces and filling. to put the extreme heart relays or text in relief use and used 3D builder that comes in window 10, to print perimeters in red color and be relief also print them differentiating the color, for the letters of the cover of the filter use the same program importing a photo without background PGN format with letters or logo, printing has been with nozzle 0.6 215 first layer then 210 the bed 60