Skip to content

Messerschmitt BF-109 G10

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.9/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 14.6k views
  • 27 likes
  • 72 downloads
  • 2 makes
License
3D design format
ZIP Folder details Close
  • BF109-G10 Messerschmitt v2.0.zip
    • BF-109 G10 600mm assembly and user guide.pdf
    • BF109 G10 MESSERSCHMIDT 600mm print settings.pdf
    • BF109-G10 Messerschmitt/fff/ailerons (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/air intake + radiator scoops (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/canopy front (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/canopy rear (PLA).factory
    • BF109-G10 Messerschmitt/fff/elevators (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/fuse 1 (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/fuse 2 (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/fuse 3 (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/fuse 4 (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/horizontal stabilisers (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/motor mount.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/2 blade/6x5 blade, high flow hub and spinner with thread.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/2 blade/6x5 blade, solid hub and spinner with thread.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/2 blade/spinner high flow reversed thread.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/2 blade/spinner reversed thread.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/3 blade/6x4.5 blade, high flow 3 blade hub and spinner with thread.factory
    • BF109-G10 Messerschmitt/fff/propeller (PLA)/3 blade/6x4.5 blade, solid 3 blade hub and spinner with thread.factory
    • BF109-G10 Messerschmitt/fff/rudder (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/wing left inner (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/wing right inner (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/wings outer (LW-PLA).factory
    • BF109-G10 Messerschmitt/fff/wingtips (LW-PLA).factory
    • BF109-G10 Messerschmitt/G-code/ailerons (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/air intake + radiator scoops (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/canopy front (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/canopy rear (PLA).gcode
    • BF109-G10 Messerschmitt/G-code/elevators (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/fuse 1 (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/fuse 2 (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/fuse 3 (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/fuse 4 (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/horizontal stabilisers (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/motor mount.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/2 blade/6x5 blade, high flow hub and spinner with thread.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/2 blade/6x5 blade, solid hub and spinner with thread.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/2 blade/spinner high flow reversed thread.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/2 blade/spinner reversed thread.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/3 blade/6x4.5 blade, high flow 3 blade hub and spinner with thread.gcode
    • BF109-G10 Messerschmitt/G-code/propeller (PLA)/3 blade/6x4.5 blade, solid 3 blade hub and spinner with thread.gcode
    • BF109-G10 Messerschmitt/G-code/rudder (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/wing left inner (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/wing right inner (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/wings outer (LW-PLA).gcode
    • BF109-G10 Messerschmitt/G-code/wingtips (LW-PLA).gcode
    • BF109-G10 Messerschmitt/stl/aileron left.stl
    • BF109-G10 Messerschmitt/stl/aileron right.stl
    • BF109-G10 Messerschmitt/stl/air intake.stl
    • BF109-G10 Messerschmitt/stl/canopy front.stl
    • BF109-G10 Messerschmitt/stl/canopy rear.stl
    • BF109-G10 Messerschmitt/stl/elevator left inner.stl
    • BF109-G10 Messerschmitt/stl/elevator left outer.stl
    • BF109-G10 Messerschmitt/stl/elevator right inner.stl
    • BF109-G10 Messerschmitt/stl/elevator right outer.stl
    • BF109-G10 Messerschmitt/stl/fuse 1.stl
    • BF109-G10 Messerschmitt/stl/fuse 2.stl
    • BF109-G10 Messerschmitt/stl/fuse 3.stl
    • BF109-G10 Messerschmitt/stl/fuse 4.stl
    • BF109-G10 Messerschmitt/stl/horizontal stabiliser left.stl
    • BF109-G10 Messerschmitt/stl/horizontal stabiliser right.stl
    • BF109-G10 Messerschmitt/stl/motor mount .stl
    • BF109-G10 Messerschmitt/stl/propeller/blade/6x4.5 high thrust.stl
    • BF109-G10 Messerschmitt/stl/propeller/blade/6x5 high thrust.stl
    • BF109-G10 Messerschmitt/stl/propeller/hub/2 blade high flow hub.stl
    • BF109-G10 Messerschmitt/stl/propeller/hub/2 blade solid.stl
    • BF109-G10 Messerschmitt/stl/propeller/hub/3 blade (high flow).stl
    • BF109-G10 Messerschmitt/stl/propeller/hub/3 blade solid.stl
    • BF109-G10 Messerschmitt/stl/propeller/spinner/spinner reversed high flow.stl
    • BF109-G10 Messerschmitt/stl/propeller/spinner/spinner reversed thread.stl
    • BF109-G10 Messerschmitt/stl/propeller/spinner/spinner with thread (solid).stl
    • BF109-G10 Messerschmitt/stl/propeller/spinner/spinner with thread(high flow).stl
    • BF109-G10 Messerschmitt/stl/Radiator scoop left.stl
    • BF109-G10 Messerschmitt/stl/Radiator scoop right.stl
    • BF109-G10 Messerschmitt/stl/rudder lower.stl
    • BF109-G10 Messerschmitt/stl/rudder upper.stl
    • BF109-G10 Messerschmitt/stl/wing left inner.stl
    • BF109-G10 Messerschmitt/stl/wing left outer.stl
    • BF109-G10 Messerschmitt/stl/wing right inner.stl
    • BF109-G10 Messerschmitt/stl/wing right outer.stl
    • BF109-G10 Messerschmitt/stl/wingtip left.stl
    • BF109-G10 Messerschmitt/stl/wingtip right.stl
    • bonus extra bits/1mm wire lock/fff/push rod lock 1mm.factory
    • bonus extra bits/1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode
    • bonus extra bits/1mm wire lock/stl/1mm wire stop clamp A .stl
    • bonus extra bits/1mm wire lock/stl/1mm wire stop clamp B.stl
    • bonus extra bits/CoG balancer/FFF/balancer long arm version.factory
    • bonus extra bits/CoG balancer/FFF/balancer shot arm (600mm model) version.factory
    • bonus extra bits/CoG balancer/G-CODE/balancer long arm version.gcode
    • bonus extra bits/CoG balancer/G-CODE/balancer shot arm (600mm model) version.gcode
    • bonus extra bits/CoG balancer/STL/arm.stl
    • bonus extra bits/CoG balancer/STL/base plate.stl
    • bonus extra bits/CoG balancer/STL/long arm.stl
    • bonus extra bits/m5 nut + wrench/fff/m5 nut REVERSED.factory
    • bonus extra bits/m5 nut + wrench/fff/m5 nut wrench.factory
    • bonus extra bits/m5 nut + wrench/fff/m5 nut.factory
    • bonus extra bits/m5 nut + wrench/g-code/m5 nut REVERSED.gcode
    • bonus extra bits/m5 nut + wrench/g-code/m5 nut wrench.gcode
    • bonus extra bits/m5 nut + wrench/g-code/m5 nut.gcode
    • bonus extra bits/m5 nut + wrench/stl/m5 nut REVERSED .stl
    • bonus extra bits/m5 nut + wrench/stl/m5 nut wrench.stl
    • bonus extra bits/m5 nut + wrench/stl/m5 nut.stl
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • Cura settings.pdf

Learn more about the formats
Last update 2022-05-04 at 22:34
Publication date 2020-11-12 at 13:37
Design number 226800
3D_Aeroworks

3D_Aeroworks

3D printer file info

3D model description

A custom replica of the Messerschmitt BF-109 G10 , this 600mm wingspan version is powered by a 2205 2300kv electric out-runner. Designed to be printed in LW-PLA this model looks as fantastic in air as it does on the ground. filled with scale details such as;
- gun ports
- exhausts
- air intake
- radiator scoops
- scale 3 blade prop

This model is recommended for the intermediate to advanced rc pilot.

TEST FILES:
https://cults3d.com/en/3d-model/various/messerschmitt-bf-109-g10-test-files-aeroworks3d

INCLUDED:

Factory files for Simplify 3d
G-code files
STL files for all components
Cura profiles for LW-PLA and regular PLA
Detailed assembly manual and user guide
Print settings guide for all parts

FLIGHT VIDEO: https://www.youtube.com/watch?v=AGaXgNNIBc4

Print time: 50hrs
Print weight: 135g
RTF AUW: 253g with gear listed below installed

REQUIRED COMPONENTS:
X1 2205 2300KV MOTOR (or similar)
X1 10AMP ESC
X1 950MAH 2S LIPO OR SIMILAR
X4 3.7G MICRO SERVO
X2 BAMBOO SKEWERS
HEAT SHRINK TUBE 3mm
X2 10mm X10mm X 2mm MAGNET (ROUND)
X10 MICRO HINGES
VELCRO
X2 x 200mm carbon strip 3mm x 0.6mm (optional)
M2 x10mm screws

PRINT VOLUME:
200x200x200

For any questions and assistance please email us at:

aeroworks3d@outlook.com

NOTE: All STL files need to enlarged to 1000% if using a program other than simplify3d.

3D printing settings

print settings doc included

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.