Christmas Apéro sleigh

Superb "Aperitif sled" to celebrate Christmas and present cakes and appetizers for the aperitif, or simply serve as a decoration on the table or under the tree.

The trays are removable for easier cleaning after use.

The front bin can be used on its own to put cakes or peanuts in, or to act as a trash can for wrappers. A "pick tray" can be added to it to display wooden picks and offer a side dish.

Printing Tips:

The Kit includes 9 printable parts for building the sled as an STL file.

All files are provided in their printing direction (free to change their layout if needed).

All prints are theoretically achievable without support, but you can use it if needed in case of worries (minimum angle of 30° to the bed on some walls).

However, it can be useful to add a border on some pieces to avoid warping.

Assembly tips:

The left and right "Skis" must be glued together to fit properly. The "step" located at the bottom of each ski is intended to be glued under the body using a strong gel glue.

The stars (optional) must also be glued: a positioning template is to be printed if needed.

Warning:

Alcohol abuse is dangerous to your health.

3D printing can create an aggravated addiction to PLA ;-)

Important notes:

If you wish to bring food into direct contact with the printed parts, please carefully read the Cults sheet on "3D Printing and Food Safety" on the "https://cults3d.com/fr/blog/articles/10-choses-a-savoir-impression-3d-securite-alimentaire" page, or in the PDF sheet attached in the package.

When using with hot food, make sure the temperature does not exceed 40° centigrade.

Nozzle Ø : 0.4

Layer height: 0.16 recommended

Line width: 0.4

Wall thickness: 1.6

Number of wall lines: 4

Top/bottom thickness: 0.8

Filling density: 40

Border: recommended for "Case" and "Back tray" (6 mm).