BlueTooth-Keyboard-Adapter
BlueTooth-Keyboard-Adapter
3D
Published 2020-10-20T14:44:05+00:00
The story behind this part. We replace an old Tablet, that we use with a logitech wireless keyboard. But, the new one is slimmer than the old one and don't fit as well, also part of the lower side of the screeen is hidden inside the keyboard slot.
This two pieces, rise a bit the screen to let touch all the screeen, better view angle and looks nice =)
Print and Enjoy..!!
Printed at 60mm/s Print Speed, consider slower speed for small parts. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 3.2mm. Four layers for Top and Buttom. Infill at 30% with ZigZag Pattern, Zig Zag infill, 10% Density.
Print both parts stand as close as possible, consider at least just in case, three or five Brim lines of Build Plate Adhesion or equivalent in your Slicer.
-Cura Slicer
-Nozzle temp 220°
-0.4 Hardend Nozzle
-Bed Tempt 60°
-CMagnet Plate
| Date published | 20/10/2020 |
| Time to do | 100 - 101 minutes |
| Material Quantity | 15gm |
| Dimensions | 27.13 x 24.8 x 46.4 |
| Support Free | YES |