Mosquito, bug, ant trap with chemical - light - electrical extension options
Mosquito, bug, ant trap with chemical - light - electrical extension options
3D
Published 2020-07-29T15:53:43+00:00
Summer time, and the mosquitos are here....
I have designed my own trap for mosquitos and bugs or ants.
The trap is build up from 3 part. basic, internal (bowl for chemical or electrical components) and different type of top for different type of bug.
the design is still project phase, basically the top is not finished that's why I tried to attach the original model but here is not possible, so if you need this one, let me know and I will help toget it and trie to modify what you want just let me know.
I have designed for the basic the hole for the light extension and for V2 and V3 top
electrical bug killer wire should be option.
I have checked how it's work the trap. You can see the result from the end of the attached video.
When I designed this trap I try to take into account the bees! I tried to design the shapes and diameter of holes to do not kill the bees.
video: https://youtu.be/k2RuWpzCY6A
Any support to me thank you:
Paypal:
https://www.paypal.me/PNkiSS
You can visit to
Facebook:
https://www.facebook.com/projectNemann
Website:
http://projectnemann.com
Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0,6
Infill:
15%
Filament_brand:
Devil design
Filament_color:
Bright green
Filament_material:
PETG
Notes:
The internal part botto should be painted to avoid the leakage or you have to choose the good print setting (100% infill or different orientation for different layer height) but I propose to paint the bottom, because of this is the cheapest way :) I have printed from PETG, because of it could be a good choice for outdoor usage. I have printed with 0,6 resolution and the print time was 6hour. (with 0,4 was calculated 15hour)
| Date published | 29/07/2020 |