This is a re-mix of the Fallout Fusion Core Display Stand by RandallMan68 and the Fallout Fusion Core by ManEatMan on Thingiverse.
This model has been modified to accept a Anker Power Core 5000 Portable Charger with an access port on the side to view the charge level of the battery and the ability to operate the button on the side of the battery with a stylus. I'm still working on a spring loaded button as I did in my full scale desk model. There is a hole in the base to pass a USB cord through the bottom to use as a charger at your desk. If your not going to use this feature, there is no need for the for supports on the bottom of the stand. The radiation stickers were printed on a color printer and applied to the the core with a glue stick. Clear lacquer was then sprayed to seal the decal. 3mm allen head bolts were used to secure the top to the bottom section, and a piece of stiff foam was inserted into the cap to keep the battery in position.