COOKIES CANNABIS BRAND WEED ROLLING TRAY SUPPORTLESS

Cookies tobacco rolling tray. No supports needed. Easy print. Get that Cookies brand blue by using BQ Easy Go PLA Topaz Blue filament. This brand of filament (1.75mm) runs best at 210c nozzle and 60c on a glass bed, when printing on an Ender 5 Plus.

This Cookies tray is different from the bog standard Cookies one I have for downloads on Cults3D...

200mmx200mmx16mm full tray size,
130mmx190mm work area or for collecting fallen debris,
120mmx30mm smoking papers compartment, labelled "RAW",
1x DRAM 13 (labelled) Squeeze top pop medical pot holder (most popular size med pot),
6x 5mm to 10mm measuring holes or holders in 1mm increments (5,6,7,8,9, & 10mm),
1x Clipper lighter holder,
1x Zippo Petrol lighter holder,
1x Disposable generic lighter holder,
1x Popular size electric lighter holder. Can fit 4Smoke branded electric lighters,
1x 160mmx40mm Half-pipe rolling section on the centre of the work area.

Please see my other rolling trays I have for download by clicking on my profile.

Specifications of model:
Size: 200mm x 200mm x 16mm (Rescaling will lose the compartments snug fittings),
Print weight on Cura using the settings stated below: approximately 169 grams,
And Cura print time (Ender 5 Plus 40mm/s): approximately 20 hours and 7 minutes.

Settings (Cura 4.7 using an Creality Ender 5 Plus):
Nozzle size: 0.4
Layer height: 0.2
Initial layer height: 0.2
Wall thickness: 0.8
Wall line count: 2
Top/Bottom thickness: 0.8
Top thickness: 0.8
Top layers: 4
Bottom thickness: 0.8
Bottom layers: 4
Horizontal expansion: 0
Infill density: 25 (you can have a higher infill density for more strength)
Infill pattern: Cubic
Build plate adhesion type: Brim (optional depending on how good your bed levelling is)
Generate support: no