1:200 Dassault Mirage F1

The Mirage F1 is a third generation multirole fighter entered service with the Armée de l'Air in the 1970s that had excellent export success like the delta-wing Mirages that preceded it although it differs from them in the high swept wing.

New models optimized for 0.2mm extruders with better resolution and details; old models at lower resolution can be found in the old.zip file.

Models: Dassault Mirage F1C and F1B two-seater both with five load configurations:

_0 clean;
_1 IR missiles Matra Magic on wing tips;
_2 fuel tanks + IR missiles on wing tips;
_3 R530 missiles + IR missiles on wing tips;
_4 Super R530F missiles + IR missiles on wing tips.

Models scale 1:200 made to be printed with a FDM with 0.2 nozzle at this scale.

For other scales use the following values into your slicer:
for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

At 1:100 it can be used a FDM printer with a 0.4mm nozzle.
Under 1:200 is almost mandatory a resin printer.

Print test 1:200 mades with a MSLA with 50 micron resolution. layers.

This creation is reserved exclusively for private and personal use; redistribution of these files, as-is or modified, is not permitted. For further details read the relevant section of the Cults website by clicking on the LICENSE description.

ciao

Enrico