MODERN CRANE

HELLO MAKERS !!!

The idea of creating this skull model came to me while observing around me, in the shopping streets, the avenues ...

Indeed, the fashion for carefully trimmed beards and moustaches has reappeared for several years now and not only in France but all over the world.

The idea came to me to start a small collection of skull with beard, moustache and hairstyle with a pure, contemporary but also flexible style.

Thanks to this magnet assembly system, you can integrate your own styles of hairstyles, beards, moustaches or other ...

The price is lower given the current economic situation, hold on, the good days will come :)

Season's greetings

Sincerely yours,

CREADINS

I have printed this design in three different sizes.

the largest skull ( L )all complete measures 183mm wide by 304mm deep by 324mm high.

(for the skull and crest, I had to split in half, split in half because I have a creality ender3 v2)

printing time 206 hours

skull and lower jaw= 131 hours

the average complete skull ( M ) = width 123 mm depth 203mm height 217 mm

printing time = 86 hours

skull and lower jaw = 54 hours

the small skull (S ) complete = width 68mm depth=113mm height=120mm

printing time= 21h

skull and lower jaw = 12 hrs.

Printer used : CREALITY ENDER3 V2

CURA PARAMETERS: CREALITY ENDER3 PRO

STANDARD QUALITY

PLA 1.75MM

LAYER HEIGHT = 0.2MM

WALL THICKNESS =2MM

NUMBER OF WALL LINES =5

FILLING = 20% CUBIC

NOZZLE TEMPERATURE = 200 °

TEMPERATURE BED = 70 °

SPEED = 50.0 MM/S

SUPPORT =45 °

PLATE ADHESION = EDGE

PS: for my impressions, I left the speed at its origin, if we increase it, I think that the printing will be shorter, I also saw that with other 3d printers, the time of impression was less long (example with the flyingbear ghost 5).

in any case, it's a beautiful object of decoration with immense possibilities of customizations, colors, materials, themes to integrate. ( what I will do soon :) )

this model is for the lovers of skulls of all kinds but it will be integrated without problem in a shop window of object of decoration, in a tattoo parlour, at a barber, in pubs, bars, night clubs etc etc etc etc etc

I advise to print this model in pla, unless your workspace is well ventilated and large.

the abs filament is easier to work with for sanding.

concerning the beard, mustache, ridge, opt for flexible pla.

Otherwise, this model can be printed without any problem with the printers of types sla, dlp, resin material.

I will be delighted to see the work of those who will print this stl file.

To your machines the makers :)