Skip to content

Distance Meter PTFE for Tube Z9M3 Hot End

DMPTFETZ9M3_02.jpg Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_01.jpg Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_75.png Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_25.png Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_50.png Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_25.stl Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_50.stl Distance Meter PTFE for Tube Z9M3 Hot End
DMPTFETZ9M3_50_75.stl Distance Meter PTFE for Tube Z9M3 Hot End
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.2k views
  • 1 like
  • 9 downloads
License
3D design format
STL Folder details Close
  • DMPTFETZ9M3_50_25.stl
  • DMPTFETZ9M3_50_50.stl
  • DMPTFETZ9M3_50_75.stl

Learn more about the formats
Publication date 2020-12-08 at 20:24
?
Published to Thingiverse on: 2020-05-10 at 00:26
Design number 241511
rabuki

rabuki

3D printer file info

3D model description

Zonestar triple extruder three color hotend 3-IN-1-OUT has three PTFE built-in.
On my Z .. none of the tubes were the same length and in fact two of the tubes were too short, which meant that the print head was not tight and the molten filament could push up into the print head. It is understood that it can only go wrong. which it did. The printer head ended up completely clogged.

After very hard and long research I found that the tubes should be 50mm - 50.5mm long. They must be so accurate that the fittings push down on the pipes so much that they are tight, but do not bend.
So it is here that "Distance Meter PTFE for Tube Z9M3 Hot End" comes into the picture, to get the pipe length exactly correct and the same.

To succeed, place the tube in the holder and push it all the way up to the end and cut it to the other end. Make sure the knife's eggs follow the holder.

I've made three lengths 50.25mm, 50.50mm and 50.75mm. If it is exactly 50mm, the fittings will not press down hard enough to hold tight. Filament can also shrink a bit during printing and it is different from filament type to type.

To easily hold the tube in place insert a small piece of filament into the hole of the holder and gently melt it together.

Have fun!

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.