Dragon Skull

A detailed Dragon Skull pre-supported for resin printing! Included you'll find 2-sets of supported .STL files ready for Print. Small & Large. You'll also find the .OBJ files of the design in 3-parts to add your own supports or print with an FDM printer! This print is completed in 2-prints on MonoX/Photon/Mars/Saturn sized printers. The supported files have been prepared at max size for Photon/Photon S/Mars/Mars Pro printers & at max size for Mono X printers. The large pre-supported version must be reduced by 19% to accomodate the build height of an Elegoo Saturn Printer. The unsupported .OBJ files are provided so you may add your own supports in various other 3D printers.

Happy Printing! :)

Example Resin settings for Photon, Photon S, Mono X printers:

Photon S/Photon/Mars/Mars Pro:

Nova 3D Clear/Nova 3D Clear Blue/Esun Plant-based Gray

Layer Thickness: .03 mm (30 um)
Normal Exposure Time: 8
Off Time: 1
Bottom Exposure Time: 130
Bottom Layers: 20
Z Lift Distance(mm) 5mm
Z Lift Speed(mm/min): 35
Z Retract Speed(mm/min):145
Anti-alias: no

Mono X/Saturn:

Nova 3D Clear/Nova 3D Clear Blue/Esun Plant-Based Gray

100% UV Power

Layer Thickness: .05 mm (50 um)
Normal Exposure Time: 2
Off Time: .50
Bottom Exposure Time: 40s
Bottom Layers: 6
Z Lift Distance(mm): 8mm
Z Lift Speed(mm/s): 4
Z Retract Speed(mm/s): 4
Anti-alias: 1

Regards,
Matthew J. Chin