Board Game Can't Stop Portable

This is my portable version for the board game Can't Stop. I made it so it is a lot small, and you can bring it with you everywhere!
It has a few pieces and you need to assemble it a bit. Here is the list of the files:
- Scatola: this is the box where you store the pieces and put the board on in order to play;
- Campo and Coperchio are the two pieces of the board. Coperchio has a little slot in order to lock in place into the box and don't let the pieces inside to fall of. On this model you have to glue the other one.
- Pedina: this is the piece that you use to play;
- Logo: if you want the logo on the side like on mine, print this and glue it on the box!

In order to play this game you need to print 3x pedina in one color, I used black, that will be used by every player in their turn. Then you have to print at least 11 for each color you want to use in your game. Every player has a different color.
On the board, the slots with the square in it are the slots where you play, the others are unused.

If you don't know how to play check this tutorial: https://www.youtube.com/watch?v=VUGvOQatVDc

I printed the game in two colors as you can see in the photos. I used the filament swap feature in order to do it!

Let me know if you like it, if you print one yourself (maybe upload a photo, I'll really appreciate it!), and also consider checking the other stuff I make on my profile. I'm still learning how to model things, but I have lots of ideas and I'll upload them soon!

If you also want to make a tip to me, I will really appreciate it, and
I'll think about continue making this stuffs 'cause I will know that
someone likes my design!