Tank Demon

Intended for 3D print.

A biomechanical horror on tracks.

The model is monopose, and consists of the following parts:

1 Tank Demon body (tank tracks, upper body, arms, head and weapons in one piece)
1 Sheathed Chain Sword (can be glued to the body on the demon's back, to the side of either track, or wherever else you like).
2 Pauldrons (can be glued to the demon's shoulders as extra protection). Please note that you may have to resize the pauldrons slightly before print for them to fit).
2 rails (can be glued along the top sides of the tank tracks as extra decoration).

All model parts are packaged in a single .stl file prescaled to suit 28mm scale. The parts are laid out in a square, and you can either cut out individual parts for printing or print all parts at once.

A hooved version of this demon is included in the Destroyer Megapack from Sharedog Miniatures, available here:

https://cults3d.com/en/3d-model/game/destroyer-megapack

If you have any questions or comments pre/post-purchase, feel free to send me a message.

Anyone interested can follow me on Instagram, under this handle: #sharedogminiatures

objects within the .stl file are pre-scaled to roughly 28mm scale. Relatively high printer settings are recommended (c.a 0.08mm layer height, 20% infill). Printing time depends on the number of model parts you choose to print at once, your settings, your hardware et cetera. Printing the entire kit at the original size takes approximately 6-7 hours.