Canadian '82 Pattern Webbing to MOLLE Adapter
$3.00 Canadian '82 Pattern Webbing to MOLLE Adapter
Published 2021-01-04T16:39:10+00:00
A simple adapter I designed for mounting Canadian '82 pattern webbing--stuff like this, that has those plastic pegs--to standard modern MOLLE/PALS webbing. This will be great for anyone looking to mount older surplus issue pouches and gear to modern MOLLE mounts.
Dimensions:
- Occupies 3 segments of MOLLE horizontally
- 8.7cm x 1.4cm x 5.7cm
- Interior spacing (between MOLLE pegs) to accept up to 6.5cm wide webbing strap
- Height designed to nestle perfectly between webbing hooks of mounted accessory
PLA should be fine for general purpose use, if printed with 100% infill; but will be malleable in heat and brittle in the cold. Recommend ABS or ASA for best performance. You might be able to get away with no supports; only overhang is the bottom of the peg tips. Print as oriented in the file
PLA should be fine for general purpose use, if printed with 100% infill; but will be malleable in heat and brittle in the cold. Recommend ABS or ASA for best performance. You might be able to get away with no supports; only overhang is the bottom of the peg tips. Print as oriented in the file
Date published | 04/01/2021 |
Price | $3.00 |
Dimensions | 8.7cm x 1.4cm x 5.7cm |
Support Free | YES |