Explosive Charges and Backpack from Transformers Netflix WFC Earthrise

Blowing stuff up seems to always been something out of Wheeljack's playbook. And where the situation called for it, we saw the stalwart Autobot team equip themselves with these backpack full of explosives to do the impossible.

Here then is our take on these fun little pieces to give your bot team a blast of a time!

These cylindrical bombs may be a little tricky to print as they are sized to be able to be held in bots' hands. Two versions have been provided - a solid one and one with a circular hollow on the back where a small 3mm diameter magnet of ~1mm+ thickness can be added.

When magnets have been added, the explosives can be attached to any metallic surface much like how it was in the series!

Coming to the backpack, this piece features five holes which are designed to hold the explosives! These taper more narrowly towards the center so that the pieces can be held tightly without falling out.

The backpack has two 5mm pegs to allow it to attach to Autobots' with a central back port, using either the higher or lower one to allow it to position it more vertically centered.

For Siege Prime though, the problem arises in that he has two 5mm ports on the sides instead of a centrally positioned one. Well then, to fix this little issue, an additional twin peg adaptor with a central 5mm port has also be provided.

Of course on top of just slugging these packs on the back, your bots can also swing them to the front to more easily extract the explosive payloads.

As always, have fun 3d printing these for your WFC bots! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog