Protector for taranis qx7

This is a protector for the taranis qx7 that protects all the components that can be easily damaged, only the expansion module and the battery cover are missing.

There is also the design of the upper part of the taranis in case you wanted to make your own designs not in exactly the meridas bit as a negative it fits perfectly

This is a protector for the taranis qx7 that protects all the components that can be easily damaged only the expansion module and the battery cover are missing.

This is also the design of the top of the taranis if you want to make your own designs not exactly in the measures but as a negative fits perfectly

Rafts:

No

Supports:

Yes

Resolution:

0.3-0.5mm

Infill:

30%

Filament brand:

Smart materials

Filament color:

Orinoco

Filament material:

PLA

Notes:

Perimeters: between 3 and 5 mm

Nozzle: 0.4 to 1 mm

**Post-Printing

In the models of protector with legs / suggestions it is necessary to remove from the lower part since they do not fit. This is not a design error, it is made in this way to make it hold in the best possible way.

It is advisable to leave it somewhat hard since in the first month it will loosen a little

In the case of the models with legs/supports, it is necessary to remove the lower part of the protector as they do not fit. This is not a design flaw, it is made this way to make it hold the best possible way.

It is advisable to leave it a little hard because in the first month it will loosen a little.